Multi Purpose Cement Dry Mix Mortar Plant To Mix Cement Sand Putty Powder

Introduction of Dry Mix Mortar Plant:

The dry mortar mixer adopts a horizontal spiral structure to make the material up and down and staggered to achieve the purpose of mixing the material quickly and evenly. The dry mortar equipment has the characteristics of simple structure, convenient use, small floor space, light weight, low noise, energy saving, convenient loading and unloading, durability, and easy maintenance. Residual materials are easy to remove, which is beneficial for multi-purpose use (such as: production of dry powder putty of multiple colors).

Working Principles of Cement Mortar Plant:

1. The mechanism of the horizontal multi-spiral mixer is mainly the shearing action of the ribbon.
2. The Mind horizontal multi-spiral mixer rotates the high-speed rotation of the agitator shaft, so that the inner and outer spiral belts turn the animal material in a large range, the inner spiral belt moves the material to both sides, and the outer spiral belt moves the material inward from both sides, so that the materials are mixed back and forth, and at the same time, some materials are driven by the spiral belt to move radially along the axial direction to form convection mixing.
3. Through the above movement, the materials are quickly and uniformly mixed in a short time.
4. The "multi-spiral dry powder mixer" developed and produced by our company has been improved several times on the basis of the U-shaped structure produced in various places, and the utilization rate of the U-shaped structure is 30% higher.
5. The machine runs smoothly, has uniform mixing, small residual amount and convenient clearance; high output, no splash, little dust, low noise, convenient operation and simple maintenance.
6. It is a versatile multi-purpose mixing equipment for powder and powder. It also can get a good mixing effect.

Applications of Putty Powder Mixer Plant:

Precautions:

1) The mixer must have a leakage protection device to ensure the personal safety of the staff;
2) Do not put your hand into the running mixer;
3) When the mixer is running, do not open the inspection hole at will;
4) All operating parts should be rotated in the direction indicated by the arrow (or required);
5) The unit should be installed away from fire, ventilation and light transmission places;
6) Do not use the minor to operate the machine;
7) Non-professionals are not free to disassemble or modify the circuit control system;
8) Do not start the motor with heavy load to avoid overload damage to the motor.