Multi Purpose Dry Mortar Production Line Plaster Mortar Dry Mix Making Plant

Descriptions of Dry mortar production line:

1. Dry mortar production line is also called premixed mortar production line, which made in the factory by precise batching and uniform mixing.
2. Automatic dry mortar production line is used for producing dry mortar with capacity of 10-12t/h, Which is based on the latest design concept in Europe, this production adopts the advanced computer auto-control system, whose production capacity can reach 30-36 thousand tons per year depend on the system configuration.

Parameters of PLC Control Dry Mix Mortar Plant:

Functions of Dry Mortar Production Line:

Features of Dry Mix Plant:

1. The mixing speed is fast, only 2-3 minutes for each mixing;

2. The machine is developed on the basis of the technical essence of multi-generation new models. It has automatic feeding, pneumatic discharging, no block on the barrel wall and no dead angle.

3. Small land area, reasonable structure, simple operation, high production efficiency, no dust, and reasonable power preparation.

4. Reasonable configuration; production of about 80 tons of dry powder mortar production line, under normal circumstances will use 4-6 raw material tanks, two large tanks for loading bulk cement and fly ash, the remaining small tanks for loading Put light calcium, heavy calcium, sand, small materials, etc.

5. Bulk cement and fly ash into the tank does not require lifting equipment, relying on pump trucks to enter. The clever material distribution system supports a bucket elevator assignment, thus avoiding wasted resources.

6. The metering system introduces the raw materials in the silo into the measuring bin under the cooperation of the measuring spiral, and realizes the raw material metering through the data feedback of the sensor. The metered material is guided into the main bucket lifter through the screw conveyor and lifted to the upper part of the mixer to be mixed.