PLC Semi Auto Dry Mortar Production Line Bonding Mortar Plant Tower Type

Specifications of Dry Mortar Production Line:

Product Introduction of Auto Mortar Production Line:

Automatic dry mortar production line s ased on the latest design concept in Europe, this production line adopts the advanced computer PLC auto-control system, whose production capacity can reach 30-100 thousand tons per year depend on the system configuration.

1. Henan Mind Dry mix mortar manufacturing plants Storage silo(carbon steel or stainless steel) mode: raw material silo, mid-silo, finish product silo.
The dry mix mortar manufacturing plants raw material in the big silo can meet many batch , the amount of silo is decided by your requirement .
2. Conveyor (carbon steel or stainless steel) modes: pneumatic conveyor, vacuum conveyor, bucket elevator, pump truck, belt conveyor, manual feeder.
3. Batching / dosing equipment modes (carbon steel or stainless steel): weighing hopper, pneumatic conveying & weighing pot.
4. Mixer / agitator (carbon steel or stainless steel) : double-shaft paddle mixer, helix mixer (ribbon type mixer), coulter mixer, reactor, conical mixer.
5. Packaging equipment (carbon steel or stainless steel): ton-bag (jumbo bag) packaging machine, valve-bag packaging machine, open bag packaging machine (granular or powdery material).
6. Control system: touch screen (siemens, Mitsubishi, etc.) + PLC.

The advantages is as following:

1. High capacity: pneumatic conveying is obviously faster than bucket elevater , the mixing time for one batch is about 5 minutes, the capacity of packaging machine is about 8-10t/h
2. Less dust: pneumatic conveying determine the plant with good sealing property, the superiority of pulsed jet cloth filter is that it can release the dust into the product, no wasted material.
3. Less material remains: some material remains in the bottom of the bucket elevater,but there is no such problem in this plant. The high pressure push all the materials into the hoppers.

Full automatic dry mortar mixing plant--What's dry mortar?

Earlier mortars were produced by masons or plasterers directly at the building site.

Full automatic dry mortar mixing plant method could not provide for the constant quality of mortars.

To guarantee the constant quality, dry mortars are nowadays factory produced and pre-mixed, and delivered to the building site in bags and silos.

After mixing with water directly at the building site, dry mortars are immediately ready to use.

Full automatic dry mortar mixing plant for dry mortar production Dry mortar is carefully proportioned blend of high quality materials including cement, lime, gypsum, well-graded dry sand and selected admixtures, such as polymer powder, cellulose ether, pigment and related additives.

Full automtaic dry mortar prodction line produced in the factory and delivered to site in small bag, jumbo bag or a silo complete with mixing equipment. When delivered, the silo contains 16t of dry material which produces about 11m3 of mortar. plants for dry mortar production It can hold up to 35t when refilled by tanker.

Once power and water supplies are connected, a constant supply of high product is available at the push of a button.