Multifunction 4mm putty mortar spraying machine voltage customized for customers

Introduction:

This machine is a kind of screw type with high pressure mortar spraying machine, advanced technology,

operation and simple maintenance, no special training, can be proficient in operation. This machine is

mainly used for building internal and external wall, cement mortar spraying and the outer wall insulation

mortar spraying, refractory coating. Artificial rivers and launch the white wall machine, main drawback is

that the density of cement mortar and the wall and mortar is low, we introduced the spraying equipment

of large flow, high pressure, customer service for the above defects, slurry density is much higher than

the standards prescribed by the state, avoids because of quality, time limit for a project, wages and other

issues caused by the trouble. Multi-usage, can spray mortar, waterproof coating, refractory material, is

not subject to regional and environmental conditions and the influence of the coating surface shape.

Parameter:

Features:

1.Construction grouting: high pressure grouting for reservoir, hydropower station, dam, port, whart;

reinforcement grouting for soft foundation; backfill grouting or rock bolting for tunnel, subway, mining well

ect.
2.Slurry circulation or mortar backfill in deep mine construction of ground source heat pump.
3.Mortar delivery for weight bridge, masonry and plastering.
4.Mortar delivery and plastering of commercial mortar or other mortar with perfect performance.

Advantage:

1. Adaptive spraying material: Putty powder, paint, latex paint, real stone paint, cement mortar, dry

powder mortar, insulation mortar, waterproof material, fireproof materials, insulation materials, sound

absorbing materials and other water-soluble materials.
2. Adjust the flow, bring up the best painting effect.
3. Besides you can switch on the electric cabinet, also equipped with remote control switch spraying.
4. Spray gun and feeding tube connections can rotate and easy operation.
5. Construction of high efficiency and good quality.
6. Small size, convenient for on-site handling, and low cost of accessories, maintenance is simple.
7. Easy to use, high speed, province materials, artificial and cheaper, one machine with three people,

only 150 square/hour (thickness 2 cm).
8. The material ratio (cement) 0.7:3 mortar

Matters need attention:

1. When the sprayer connection must be connected to the ground wire connection, after connect wire must be Bandage firmly by insulating tape.
2. Be sure to lock the wheels at work.
3. Wash the body, carefully not into the motor.
4. Be sure to check whether there is the right amount of oil inside the air compressor.
5. After use must clean the hopper, rush clean both inside and outside.
6. When mixing, hands are forbidden to insert inside the hopper.
7. Air compressor and the motor rotates, do not touch.

Pictures: