PR40 5 Inch RC DTH Hammer , Alloy Steel Mining Drilling Tools High Crush Function

RC series reverse circulation DTH Hammer is the latest developed product of our company. It is mainly used for deep exploration drilling and ore grade control.

R.C. Drilling, referred to as "Centre Sample Recovery"or "Dual Wall Drilling", employs a Dual Wall PIpe where the drilling medium, normally high pressure air, is passed between the outer and inner tubes down to the face of the drilling bit where it is returned up the centre tube along with the sample cut by the drill bit.

RC hammers and bits are used in hole drilling in mines, hydrology and water well, geothermal well, geothermal air conditioning well, geologic exploration, gravel stratum, etc Especial suitable for complicated formation (Formation loose, difficult to drilling and unstable of hole wall), exhausting for deep hole, environment protection.

THE USE AND THE ADVANTAGES OF THE R.C. DTH HAMMER:

No contamination

The R.C. System collects sample throungh the recovery holes in the face of the drill bit immediately as the cuttings or sample is formed. The drilled sample does not have to travel the length of the hammer where contamination and loss of sample takes plasce.

Higher Production

In broken and fractured ground conditions, the R.C. will often out perform the conventional hammer in terms of penetration rates.

Dry Sample

Even in certain water bearing stratas it is still possible to collect ad dry sample because the cuttings(sample) are collected as they are formed through the face of the drill lbit.

Higher Sample Recovery

Because the sample is collected throungh the face of the drill bit there is no loss of sample when drilling through broken or fractured ground. And since the bit matched to the chuck size, there is very little bypass of sample and recovery rates of up to 98% are generally achievable.

FAQ

Q1: Are you trading company or manufacturer ?

A: We are manufacturer (factory).

Q2: How long is your delivery time?

A: Generally it is 5-15 working days if the goods are in stock. Or it is 20-30 working days if the goods are not in stock, it is according to the quantity.

Q3. Can you produce according to the samples?

A: Yes, we can produce by your samples or technical drawings. We can build the molds and fixtures.

Q4. Do you test all your goods before delivery?

A: Yes, we have 100% test before delivery.

Q5: How do you make our business long-term and good relationship?

A: 1. We keep good quality and competitive price to ensure our customers benefit ;

2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.