550GSM P84 fabric filter to industry corrosive gas like chemical metal cement
P84 high temperature resistant needle-punched felt: P84 (polyimide fiber) has remarkable properties due to the fineness of the fiber itself, and it also provides a lot of micro-pore to make the surface filtration effect better than deep filtration because of the irregular cross-section of the fiber which increases the surface area of the fiber to the maximum. Dust only stays on the surface of the filter felt, but can not penetrate into the filter felt. Therefore, the reverse washing pressure is small and the cake bouncing efficiency is significantly improved. It has excellent collection efficiency of fine particles and small pressure difference, and its chemical properties are very superior, but the price is high. Our company is a high temperature resistant filter material made of polyimide fibers from Lenzing Company. It has remarkable temperature resistance, excellent acid and alkali resistance, low backwashing pressure and high cake ejection rate, and the limiting oxygen index is 26%.
Application
It is suitable for coal-fired boilers, liquid bed boilers, waste incineration, asphalt plants, cement plants, waste incinerators, etc.
Material | P84 fiber | |
Weight | 450-500g/m² | |
Thickness | 2.4mm | |
Air permeability | 16m³/㎡·min | |
Fracture strength | Meridional direction | >1600N/5×20cm |
Zonal direction | >1800N/5×20cm | |
Fracture elongation | Meridional direction | <25% |
Zonal direction | <35% | |
operating temperature | Continuous | 260℃ |
Short-term | 280℃ | |
Post-processing mode | ■ Singeing ■ pressing ■ High temperature setting |