800GSM Fiberglass air filter fabric for cement iron incineration power
This product is a new type of high temperature filter material with excellent performance. It mainly consists of 5.5 M glass fiber, supported by a certain amount of high temperature fiber P84, Aramid 1313 (Metas), aramid 1414 (Kevla), PPS, PTFE. With three-dimensional micro-porous structure, low resistance to operation, especially the irregular blade shape of P84 fiber cross-section, the surface area of the fiber increased by about 80%, so it has a strong dust-resisting and dust-catching ability. The polarity of the two kinds of fiber materials complement each other. Similar to the filter bag, it can capture the smiling dust. At the same time, the irregular cross-section of P94 makes the fibers have strong cohesion and entanglement force, greatly improves the peeling strength between the felt layer and the fabric, thus increasing the filtration air speed by 50%, reaching 1-1.4 m/min, and improving the wear resistance by 3-4 times, and prolonging the service life. The filter material is suitable for high temperature flue gas filtration in iron and steel, metallurgy, chemical industry, coal-fired boilers, incinerators, refractories and cement industries. It is suitable for use in bag filters of pulse ash cleaning and high-speed back-blowing. After long-term test of high temperature and corrosive medium, the filter material has excellent performance, can effectively control dust pollution and recover valuable fine particles.
Material | glassfiber | |
Weight | >950g/㎡ | |
Thickness | 2.4~3.0mm | |
Air permeability | 8~15m³/㎡·min | |
Fracture strength | Meridional direction | >2100N/5*20 |
Zonal direction | >2200N/5*20 | |
Fracture elongation | Meridional direction | <10% |
Zonal direction | <10% | |
operating temperature | ≤260℃ | |
Post-processing mode | Teflon treatment and film coating |