Portable Dustless Sand Blasting Machine for Refineries Cleaning / Paint Removal
Product Introduction:
Applicable to large steel structural parts, ships, bridges, aerospace, military products, track equipment, wind power towers, port machinery, petroleum machinery, engineering machinery, mining machinery, textile machinery, special vehicles, large castings, inner and outer walls of steel pipes, etc. rust.
Basic parameters:
The interior of the blasting chamber body forms a layer of airflow from the top to the bottom of the chamber body under the action of the wind force. The abrasive material forms a solid-gas mixture through the compressed air and is sprayed onto the surface of the workpiece for chip cutting. Part of the abrasive chips are broken to form dust. The downward flowing air stream drives the dust in the air to mix the abrasive and the rust-removing impurities, and returns to the sorting system through the honeycomb returning sand floor for sorting. After sorting, the recyclable sand is returned to the storage bin for automatic sandblasting according to the requirements of sandblasting; the non-reusable dust and impurities are taken to the dust collector for fine filtration, and the dust is deposited. After the waste container is recycled, the gas filtered by the filter element is re-discharged to the atmosphere or recycled for use in the blasting room. The whole work process is closed, no dust spill, safe and environmentally friendly. |
STR-LT-3-12 standard module dust collector main technical parameters
Dust removal form: filter cartridge dry
Dimensions: 2020*1420*4050mm (L*W*H)
Filter cartridge specification: φ350*1320mm (consisting of 2 φ350*660mm filter cartridges)
Number of filter cartridges: 12
(1) Lifting and transportation precautions
1. The machine's conventional packaging is wrapped in a foam film and indicates the direction and position of the center of gravity.
2. Pay attention to the direction of gravity when lifting or shovel, so as not to overturn the machine.
3. Be careful when handling the machine, and do not allow rough handling.
4. This machine is strictly prohibited from being placed upside down during handling.