Movable Dustless Sandblasting Equipment for Oil and Gas Cleaning / Wood Paint Removal
Product Introduction:
The dustless blasting machine produced by our company is based on the traditional dry blasting machine and developed by our company. The control system is improved. It completely ended the problem of serious dry blasting pollution, and the dust was well controlled. Unlike the current wet blasting equipment, the water blasting machine requires very little water and can evaporate quickly, without causing large areas of water. The injection pressure can be adjusted freely between 0.3-0.7Mpa. Under the same conditions, The amount of sand used is only one-fifth of that of dry blasting, and the sprayed abrasive can be recycled and reused, greatly reducing the cost of use. Our company's water blasting machine: environmentally friendly cleaning, less sand, more economical, worthy of the use of the majority of users.
Basic parameters:
2 Cubic Foot Capacity 30 Minute blast time per fill Tank Dimensions: 55" H x 27" W x 34" D Weight: 263 lbs Operating Pressure: 30-150 PSI ISO 9001/CE Compliant Compressor Requirement: 185+ CF |
key Features:
Remove paint, rust, body filler, powder coating, and even chrome in one simple step.
The water in the Dustless Blasting process eliminates friction and heat - so you don’t have to worry about warping metal.
Leave your customers (or yourself) with a primer ready surface when you use our Rust Inhibitor to prevent flash rust.
Check the Operating Video in Our Youtube Channel Link Below: