Automatic PLC Tracked Type Sand Blasting Machine for Mass production of Small Workpieces Zipper Heads and Screws

Product Description

1. Dispose of 200-300 kg hardware tools at one time.
2. The sandblasting evenly turns over the rubber eight-pound mechanism and flips evenly.
3, the nozzle swing mechanism, the track running speed can be frequency-controlled to reduce the scratches of hardware tools.
4, speed efficiency 6-10 minutes can handle 200-300 kg pliers.

Main technical parameters

Application

1, sandblasting host
The main machine is welded by a 5mm thick carbon steel plate, and the inner and outer surfaces of the engine room are painted. There is a vent at the back;
2. Track rotation mechanism
The track rotation mechanism is driven by a reducer, and the power of the reduction motor is 2.2Kw;
This machine is equipped with 6 high-efficiency nozzles, which are made of high wear-resistant boron carbide material. Specifications: φ8*φ20*60.
The nozzle is driven by a 0.75Kw motor, a set of 3 nozzles, and 6 nozzles cover the sandblasting host. The swing speed can be frequency-controlled.
3, high efficiency separator
The separator is an important part of the equipment, which can effectively separate the good abrasive and dust, and ensure the abrasive loss can be saved under the premise of efficient processing of the workpiece.
4, dust removal system
The dust removal system consists of filter element, pulse backflushing, body, dust collector, dust removal fan, etc.
5. Main technical parameters:
1. Size of the sand blasting machine (length × width × height): 1300 × 1830 × 2250mm
2. Track drive motor power: 2.2Kw
3. Swing motor power: 0.75Kw
4, dust removal fan power: 4Kw
5, the total power of the equipment is about: 7Kw
6. The total air consumption of the equipment is about: greater than 6m3/min (0.7Mpa) (customer-supplied)
7, power requirements: 380V ± 10V 50Hz