Pressure box manual sand blasting machine features:
1. Novel design, simple operation, saving floor space and eliminating environmental pollution;
2, environmentally friendly box design, automatic use of abrasives, low abrasive consumption;
3. The pressure tank part adopts the newly developed exhaust valve device to avoid the defects of the high failure rate of similar products in China;
4. The processing efficiency is faster than the general pressure sand blasting machine, the impact force is strong, the impact point is deep, and the work efficiency is high.
NO SPACE(mm) SIZE(mm) FAN AIR COMSUMPTION(m3/min/Mpq)
STR-9080P 900*800*650 900*1300*1700 550W 1.6-3m3/min/0.8Mpq
STR-1010P 1000*1000*700 900*1500*1800 750W 1.6-3m3/min/0.8Mpq
|
Application range of sandblasting machine:
First, pretreatment: electroplating, painting, spraying, etc. all covered by sandblasting before processing, the surface is absolutely clean, and greatly improve the adhesion of the cover layer and corrosion resistance.
Second, cleaning: metal parts such as castings, stampings, welded parts, heat-treated parts, etc., descaling, residue, dirt; surface cleaning of non-metallic products, black spots on the surface of ceramic blanks and reduction of lacquer patterns.
3. Renovation of old parts: refurbishment and cleaning of all moving parts such as automobiles, motorcycles and electromechanical equipment. At the same time eliminate fatigue stress and extend service life.
Fourth, the light decoration: all metal products and non-metal products (plastic, crystal, glass, etc.) surface traces are eliminated, argon matte surface treatment, so that the surface of the product is upgraded.
V. Mold treatment: argon matte surface treatment on the surface of the mold, graphics production, and mold cleaning, without damaging the mold surface to ensure mold accuracy.
Sixth, burr treatment: the micro-burr removal of the machined parts, the plastic parts of the injection parts are eliminated.
7. Rework of defective products: removal of bad cover of the product, poor surface coloring and removal of printing.
Eight, strengthening: increase the surface hardness of metal parts, eliminate stress, such as aircraft blades, springs, machining tools and weapons and other surface treatment.
Nine, etching anti-skid processing: metal products, non-metal products surface etching pattern, text and anti-slip treatment, such as: marble, handle slip, seal, stone lettering.
Ten, denim treatment: denim wear matte, whitish and cat whisker effect.