High Speed 1D CCD Barcode Reader Module with Manual Continuous Auto sense flashing Function
DE1300 barcode module Features
☆ Small size design, can be applied to many machines.
☆ Read all mainstream 1D barcodes such as UPC-A,UPC-E,EAN-8,Code 128,Code 39,Code 93 etc.
☆ High-performance processor, quick decoding. (4mil)
☆ Low power consumption, can be upgraded online.
☆ Interface support: USB, TTL, PS2.
☆ Support multiple systems and languages, secondary development.
Physical Parameter | |
Weight | ≈6g |
Dimension | (L)22.5mm * (W)28.0mm * (H)12.3mm |
Interface Type | 12PIN Pitch 0.5 |
Communication Mode | USB(USB-KBW,USB-COM),TTL,PS2 |
Power Supply | DC 3.3-5V@50mA(work) |
Performance | |
Scan Type | Linear CCD |
Light Source | Visible red light,625±10nm |
CPU | 32-bit |
Optical Resolution | 1500 |
Resolution | ≥4mil/0.1mm(PCS90%,Code 39) |
Decoding speed | 300times/s |
Depth of field | 60mm-500mm |
Scan Mode | Manual ,Continuous,Auto sense,flashing |
Scan Angle | Roll±30°,Pitch±50°,Skew±50°(PCS90%,Code 39,10mil/0.25mm) |
Print Contrast Signal | ≥25% |
Ambient Light | Dark environment, indoor natural light |
Symbologies | UPC-A,UPC-E,EAN-8,EAN-13,ISSN,ISBN,Code 128, GS1-128,ISBT 128, Code 39,Code 93,Code 11, Interleaved 2 of 5,Matrix 2 of 5,Industrial 2 of 5,Standard 2 of 5(IATA),Codabar(NW-7),Plessey,MSI Plessey,RSS,China Post,etc. |
Environmental | |
Operating temperature | -20℃ to 50℃ |
Storage temperature | -40℃ to 70℃ |
Humidity | 5% to 95%(non-condensing) |
Drop Height | 1.2 m |
Transport vibration Test | 10H@125RPM |
Depth of field | |
4MIL | 100-120mm (PCS90%,Code 39) |
13MIL | 65-240mm (PCS90%,EAN-13) |
20MIL | 65-350mm (PCS90%,Code 39) |
40MIL | 150-500mm (PCS90%,Code 39) |
Accessories List | |
Cable(Optional) | USB Cable, used to connect the DE1300 to a host device. RS232 Cable, used to connect the DE1300 to a host device, with USB supply cable. PS2 Cable, used to connect the DE1300 to a host device and keyboard input device. |
Development board( optional) | Equipped with a trigger button, beeper and RS-232 & USB output function. |
Power Adaptor | Output: DC5V 1A, Input: AC100~240V 50~60Hz(serial port optional). |
Definition (11PIN pitch 0.5 )
PIN# | Signal | I/O | Definition |
1 | NC | - | Hang in the air |
2 | VCC | - | 3.3-5V power input |
3 | GND | - | Ground |
4 | RX | Input | TTL-RS232 receive |
5 | TX | Output | TTL-RS232 send |
6 | D-/HOST DATA | Input/Output | USB_D- Signal/PS2_HOST DATA |
7 | D+/HOST CLK | Input/Output | USB_D+ Signal/PS2_HOST CLK |
8 | KB DATA | - | PS2_KB DATA |
9 | BUZ | Output | Buzzer output signal |
10 | LED | Output | LED output signal |
11 | KB CLK | - | PS2_KB CLK |
12 | TRIGGER | Input | Trigger pin, keep low power level more than 20ms can trigger decoding. |