Automatic 12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger for VRLA SLA AGM GEL
Product Description
Features:
1. 12V/24V car battery charger
2. Fast, high frequency technology with 3-stage charging
3. One touch automatic charging; LCD display
4. Battery detection, short circuit protection, over voltage protection,Anti - reverse connecting protection,etc.
5. Charging indicator shows charging process directly, which facilitates users to manage the current of the battery.
Name | Universal 12V 24V autotecognition lead acid battery charger |
Input | 220Vac |
Output | 14.7V Float charge voltage:13.8V (for 12V lead acid battery) 29.4V Float charge voltage:27.6V (for 24V lead acid battery) |
Output current | 14A |
Features: | 12v/24v automatic conversion |
Compatibility | 35AH-200AH lead acid battery |
Protection | Short circuit protection Low-voltage protection Overvoltage protection Overcurrent protection Overheating protection Smart security protection Overall earthquake resistance Overcharge and overdischarge protection Reverse connection protection Overshoot over discharge protection |
Apply to | Children's toy cars, motorcycles, cars, buses, trucks, etc. |
weight | 1100g
|
12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger
The 12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger has designed highly reliable and meet international safety and electromagnetic compatibility requirements.
A: Input Characteristics:
Input Voltage: 100-240Vac input AC voltage
Input Frequency: 50Hz or 60Hz and single phase.
Inrush Current (cold start):30A Max.@110Vac/60HZ/ 60A Max.@230Vac/50HZ
Efficiency: ≥85.0% 230Vac/50Hz(Typical full load)
B: Output Characteristics:
Constant Charging Voltage: 14.7V Float charge 13.8V
29.4V Float charge 27.6V
C: Charging Mode12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger
3 Stages, CC, CV, Trickle
D: Safety Test for battery charger
Hi-pot Test:15KVac 5mA 3 Seconds between input and output test
Resistance:The liftpo4 battery charger insulation resistance shall be not less 30M ohms after application of 500Vdc/10mA for 3 Seconds
Drop test: Height: The wheelchair battery chargerconform to BS EN60068-2-32:1993 TEST ED: free fall appendix B
E: Protection for battery charger
Over Voltage Protection The power supply will be auto recovered when faults remove
Over Current Protection Charger output current does not exceed the set maximum battery charging current.
Over Short Circuit Protection Battery charger output can be shorted without damage No odor, smoke, fire, plastic deformation, and excessive heal happen. The power shall be auto-recovery. (It will enter into normal condition when then the fault condition is removed)
Over reverse polarity Protection When the battery charger output line reversed after the charger will not work until the right user access only to start.
F: DC Connector Dimension:
12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger
Optional output connector: 3-port Inline, 3-pin XLR, Alligator clip, 3-port House, Coaxial etc.
Special plug: 4-pin XLR, 2-port Inline, 3-pin House, Polarized, 3-port House for Panterra and Grio, Polarized C7 etc
12V 24V lead acid battery charger Universal 12V 24V 14A Pulse Repair lead acid battery charger
Q: Where are you located?How can I visit there?
A: We are located in Taizhou, Zhejiang,China. About four and half an hours train from Shanghai/ two hours airplane from Guangzhou. All of our clients, no matter from home or aboard, are warmly welcome to visit us!!!
Q: How to order?
A: Please send us your purchase order by Email or leave message on the website, or you can ask us to send you Proforma Invoice for your order.We need to know the following information for your order:
1) Product information: Quantitiy, Specification(model, color or other informations)
2) Delivery time required.
3) Shipping information:Company name, Address, Phone number, Destination seaport/airport.
4) Forwarder's contact details if there is any in China.
Q: How long and how to get sample from us ?
A:1) If you need some sample to test, we can make as per your request. You need pay for the transportation freight cost of samples and also the sample cost.
2) Lead time for sample: about 10 working days.
3) The transportation freight of samples: the freight depends on the weight and packing size and your area.
Q: What is the payment terms for sample cost and order amount?
A:For sample, we accept the payment sent by West Union,Paypal, for orders, we can accept T/T.
Q: What is the whole process for doing business with us ?
A:1) First, please provide details of the products you need.
2) If price is acceptable and client need sample,we provide Proforma Invoice for client to arrange payment for
sample.
3) If client approve sample and require for bulk production for order,we will provide Proforma Invoice for client.
4) We will show photos of all goods, packing,details, and B/L copy for client after goods are finished. We will
arrange shipment and provide original B/L when the payment is cleared.
Q: Can the logo or company name to be printed on the products or package?
A: Sure.Your logo or company name can be printed on your products by labels.
Our Service
1. OEM Manufacturing welcome: Product, Package,logo and brand.
2. Sample order :Free sampls but you need pay for freight.
3. We will reply you for your inquiry in 24 hours.
4. after sending, we will track the products for you once every two days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you.