MJ143C Automatic multi-chip saw machine

MJ143E automatic multi-chip saw machine can professionally solve the vertical multi-piece sawing of wood with a processing width of less than 250mm and a processing thickness of less than 100mm. Mainly applicable industries: floor strips, decoration strips, handicraft strips, door and window strips, etc.

MJ143C Multi-chip saw Features:

1. This machine is specially used for the production of modified materials, wood strips and wood core boards. According to the preset size, multiple wood strips can be sawed out in one feeding. The feeding wheel is used to feed the material, and the upper and lower feeding wheels are used for synchronous feeding.

2. There are 5 sets of upper feeding wheels and 3 sets of lower feeding wheels. The feeding is strong and powerful. The pressure of pressing the wood is controlled by the pressing cylinder, which can be adjusted freely depending on the hardness of the wood.

3. The feeding speed can be changed steplessly, and can be adjusted elastically according to the nature of the wood.

4. Feeding wheel feeding, which is more economical than crawler feeding, easy to control and maintain, and uses air pressure for pressing material, so even if the thickness of the wood changes greatly, the pressing pressure is also fixed, and the thickness of the pressing material is wide, up to 30 mm.

5. Electric adjustment of the upper feeding wheel frame and the lifting and lowering of the saw blade spindle is easy to operate.

6. The saw blade spindle can be lowered to make the saw blade leave the saw blade work surface, and it is easy to replace the saw blade.

7. The diameter of the spindle is 50 mm, using special alloy steel material, which has been heat treated and ground for many times.

8. The main shaft adopts large-sized and high-grade bearings, which are load-resistant and have a long service life.

9. Loading and unloading film group to protect the operator.

10. The saw blade cooling device prolongs the service life of the saw blade and reduces the cost of purchasing the saw blade

11. At the same cutting height, a smaller diameter and thinner saw blade can be used, which greatly reduces the loss of wood and saves the cost of purchasing saw blades.

12. The special installation and fixing method of the saw cutting board makes the production and installation of the saw cutting board simple and convenient.

13. The upper feeding wheel can be lifted off the table, and it is convenient to maintain and remove the dust accumulation of the feeding wheel.

Multiple chip saw specification

Details and description:

The upper five and the lower three driving wheels are synchronously feeding, which is powerful and powerful	The high-torque reduction worm gear box is equipped with a universal joint for smoother feeding
The upper and lower anti-rebound device can effectively prevent the wood from rebounding and hurting people	The feeding speed is adjustable in nine gears, and the appropriate speed can be selected according to different requirements
Saw shaft, feeding electric lifting, according to the thickness of wood processing, quickly adjust the lifting height	Equipped with pump system, maintenance is more convenient and fast
Polyurethane bridge board, improve sawing accuracy, economical and durable	The mist-like internal water spray device prolongs the service life of the saw blade and minimizes the amount of water received by the wood

Package and shipping:

The multiple chip saw is packed by plywood case, which is suitable for FCL and LCL shipping.

After sales services:

1. Warranty: 1 year

2. Lifetime upgrades and consulting services

3. 24-hour servic hot line for consulting and solving the problems

4. Provide product design and solution within 24 hours