Double station automatic extrusion blow molding machine1).The screw adopt high potency melt to make sure the material well mixed for different material such as PP, PE, PS, PAN, PA, PPE, PP0, ABS, POM, TRV.
2).Adopt frequency control of motor system to reduce the power consumption
3).Choose single and double station according to your output easily.
4).Adopt horizontal movement frame to improve stability and speed.
5).The oil cylinder is in the center of the moldboard, uniform stress for quality products and increase life span.
6).Three guild rod controller the mold open and clamp, to enhance the steadily and high efficiency.
7).The extrusion frame use head device, to influence the melt material avoid joint with the mold.
8).The extrusion head use spreader or screw type to well mixed the thickness and easy to change different color.
9).Adopt parison control when necessary for thickness
10).The professional oil system to reduce strike and noise.
11).Use auto circular cutting system and automatic Conveyor belt for fully automatic produce when necessary.
12).According customer's request, labeling machine is assorted.

1-layer single diehead,2-layer double diehead,2-layer diehead with view stripe by centre feeding of out-layer,tripie diehed quad diehead,hexa diehead,3-layer,4-layer,5-layer and 6-layer diehead.

• Hydraulic pattern and pneumatic system:

  We adopted the oil circulation system from Ameria vielcers or Japan YUKEN.The selecting of oil pump,circulation board and the unique filter system,makes the oil circulation with faster speed,stabillity in reducing speed,low noise,energy conservation and long duration.
  

• Electrical controlling system:

  On the basis of our rich experiences in extrusion field,we all adopt high quality pneumatic accessories,and in accordance with the requirement of each extrusion blow products,we design different article,air exhausting,air dryness and so on blow system.