PFA squre tube, PFA Rectangle tube

Introduction:

PFA shrink tube is made from PFA resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property.It can besolid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature isup to

260 and is an ideal material for circuit board and flat cable.

Properties :

High low temperature resistance:

-200--260°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:

Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).

None stick to water ,oil :water contact angle:θ=115^o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.

Volume resistance>10¹⁸ΩM
Surface resistance>2*10¹³Ω
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others acid,alkali or ester won’t effect it.

Fireproof :If firing, and will still insulate .

High diaphaneity

UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient

Technical index of PFA:

Specification

Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.

For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .

Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)

Plastic bag &carton . Customized is acceptable