MachineU > China Products > Rubber & Plastics > Plastic Products > Plastic Tubes
FEP winding tube, FEP spiral tube
FEP winding tube, FEP spiral tube
FEP winding tube, FEP spiral tube
FEP winding tube, FEP spiral tube
Specifications
Place of Origin :
China
Brand Name :
Prochema
Certification :
MSDS
Description

ChinaFEP winding tube, FEP spiral tube

Introduction:

FEPtube is made from FEP resin and prepared by the technology of thermoplastic extrusion and blowing. It has non-sticking, heat-resistance, aging resistance, corrosive resistance, non-flammability and good electric property. It can be solid adhesive for PTFE and also a good adhesive for laminating various materials. Its working temperature is up to 200 and is an ideal material for circuit board and flat cable.

Features:

The characteristic is a large and bending around the curve, since the minimum bend radius increases with the pipe diameter.

This product is spirally cut at the same time it extrude a tube PFA /FEP resin which is a kind of fluoro-resin.

This spirally tube has the outstanding feature which a fiuoro-resin has. They are heat resistance, chemical resistance, anti-stick property,electrical insulation properties,etc.

It is suitable for wiring union in high temperature atmosphere etc.

Usage : Use to protect wire ,cable etc .

Hose Protection Sleeve Performance

1)Exterior surface:spiral guard surface smooth, no lack of material, cracks, damage and glitches; no foaming and uneven; no impurities and variedness

2)Shore hardness is generally 85 to 90 degrees

3)Good resistance Of high and low temperature performance

4)Good oil resistance

5)Good abrasion resistance

6)Good tensile strength and impact resistance.Tensile strength at room temperature is generally 25 ~ 30Mpa;Impact strength(unnotched):continue

7)Has good UV resistance. Black spiral protection sleeve product line by adding a certain ratio of carbon black to enhance the spiral wrap UV protection properties. This is the black spiral wrap sleeve protective cover than the other colors better UV performance reasons

8)Good antistatic property

10)good insulation and abrasion protection for wires, cables, hoses,pipes and tubing.

Spiral protective sleeve provides maximum protection against abrasion and has a high resitance against ultraviolet weathering in a wide temperature range. It can install easily without removing connectors or terminal . Dramatically increase serviceable life and reduce costly repairs and down.

FEP winding tube, FEP spiral tube

Properties :

High low temperature resistance:
-200--200°C,high temperature strength is 2 times higher than PTFE
Good adhesive and heat sealability with PTFE:

Below melting point ,it won’t stick any project.Above melting point, it has perfect adhesive property with PTFE, Metal and self-adhesion(heat sealing).

None stick to water ,oil :water contact angle:θ=1150o
Electric reliability,High dielectric
60HZ-60MHZ,Under the high and low temperature,thepermittivitykeeps2.1even if the surface damaged ,it won’t has conductive track.

Volume resistance>1018ΩM
Surface resistance>2*1013Ω
Voltaic Arc Resistance>165sNo electric leakageWeather resistance:It can be used in sunlight and ozone long
Anti-corrosion:Only in high temperature, Fluorin and alkalis can effect it,others acid,alkali or ester won’t effect it.

Fireproof :If firing, and will still insulate .

High diaphaneity

UL-Resistance :Good penetrability in ultraviolet radiation,and lowest refraction coefficient

Technical index of FEP:

ItemValue
General purposeElectric purpose
Density g/cm32.12-2.172.12-2.17
Temperature range°C-200 -+200-200 -+200
Longi&tray,shrink rate %≤3.03.0
Tensile strength Mpa ≥1414
Elongation at break %≤175175
Tear Strength (N/m) ≥4.9x1044.9x104
Dielectric Constanct (106Hz)2.15
Dissipation Factor 106Hz≤1x10-3
Volume resistance (Ω.m)1x1014

Dielectric StrengthTH≤0.05mm

Th 0.05-0.1mm

M/VTH ≥0.1mm

100
75
50

Specification

Dia ø1.5 --300mm, Thickness: 0.015mm to 0.75mm. Length :50mm to unlimited.

For UV lamp T4 T5 T8 T10 T12 , Thickness 0.2 to 0.5mm .

Color and sizes can be customiszed .Surface treated can be done (chemical or plasma treated)

Package :

Plastic bag &carton . Customized is acceptable

Product tags

tube coil

,

filament winding tubes

,

pe spiral tube extrusion line
Send your message to this supplier
Send Now

FEP winding tube, FEP spiral tube

Ask Latest Price
Product Detail
Place of Origin :
China
Brand Name :
Prochema
Certification :
MSDS
Contact Supplier
FEP winding tube, FEP spiral tube
FEP winding tube, FEP spiral tube

Mianyang Prochema Commercial Co.,Ltd.

Active Member
12 Years
Sichuan, Mianyang
Since 2004
Business Type :
Manufacturer,Distributor/Wholesaler,Exporter,TradingCompany,Seller
Main Products :
Capacitive touch sensor, Chemical, conductive film
Total Annual :
$1,000,000-$5,000,000
Employee Number :
>less than 50
Certification Level :
Active Member
Discover similar products
View More

Find Similar Products By Category:

Supplier Homepage Products FEP PRODUCTS
MachineU China Products Rubber & Plastics Plastic Products Plastic Tubes
Contact Supplier
Submit Requirement