Specifications
Place of Origin :
Shenzhen China
Brand Name :
Australian EMC testing
Model Number :
electrical device/Radio Wireless device
Certification :
SAA, RCM mark, EMC, CISPR
Description

EMC standards list

Provide Australian EMC testing for electrical device/Radio Wireless device EMC testing, AS/NZS 4268:2008

The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as a mandatory standard under section 162 of theRadiocommunications Act 1992as part of the ACMA's Electromagnetic Compatibility (EMC) Regulatory Arrangement.

The Australian Communications and Media Authority (ACMA) incorporates the listed standard(s) as mandatory standards under section 162 of theRadiocommunications Act 1992as part of the ACMA's Electromagnetic Compatibility (EMC) Regulatory Arrangement.

Suppliers must select an appropriate standard in column 2 of Part 2 of the table below as an applicable standard for a device. If none of the standards listed in Part 2 apply to a device then a generic standard form column 2 of Part 1 becomes the applicable standard for that device. The ACMA only mandates performance requirements in relation to emissions therefore compliance to standards within this list is only required to the extent that matters within the standard that relate to interference to: (a) radiocommunications; and, (b) any uses or functions of devices.

It is important to note that:

  • The expiry date listed in Column 9 of the standard refers to the expiry of the replaced standard listed in Column 8 of the table.
  • The applicable standard listed in column 2 is modified by any relevant notes listed in Column 10 of the table.
  • Expired standards are listed in a separate document. These standards are not applicable standards for new equipment and are included in the attached document for information only.
  • The expiry date listed against the standard in Column 9 indicates the day after the last day that the standard could be used for compliance of new equipment.
  • In this version of the table some original columns have been removed as the information was not pertinent. Original column numbers have been retained to align the table with theRadiocommunications (Electromagnetic Compatibility) Standard 2008.
  • *For any standard listed with an AC, the ACMA will accept the test report with or without the AC as these are editorial changes

Part 1 Generic standards

1

2

3

4

7

8

9

10

Item No.

Applicable Standard

Full Title of Standard

Publication Date

Brief description of equipment type

Standard being replaced

Expiry Date of replaced standard

Remarks

G1

AS/NZS 61000.6.3: 2012

Electromagnetic compatibility (EMC) – Part 6.3: Generic standards – Emission standard for residential, commercial and light-industrial environments

30/04/2012

Equipment intended for use in a residential, commercial, or light industrial environment that is not covered by one of the product family standards

AS/NZS 61000.6.3: 2007

14/10/2015

Harmonics and flicker not required

AS/NZS 61000.6.3: 2007

31/05/2007

AS/NZS 4251.1:1999

31/05/2009

EN 61000-6.3:2007
/A1:2011

2007

EN 61000-6-3: 2007

12/01/2014

IEC 61000-6-3:2011
(Ed 2.1)

17/02/2011

IEC 61000-6-3:2006

14/10/2014

IEC 61000-6-3:2006

17/07/2006

IEC 61000-6-3:1996

17/07/2008

G2

AS/NZS 61000.6.4: 2012

Electromagnetic compatibility (EMC) – Part 6.4: Generic standards – Emission standard for industrial environments

09/05/2012

All equipment intended for use in an industrial environment that is not covered by one of the product family standards

AS/NZS 61000.6.4: 2007

14/10/2014

Harmonics and Flicker not required

AS/NZS 61000.6.4: 2007

31/05/2007

AS/NZS 4251.2:1999

31/05/2009

EN 61000-6-4:2007
/A1:2011 (Ed 2.1)

IEC 61000-6-4:2011
(Ed 2.1)

23/02/2011

IEC 61000-6-4:2006

14/10/2014

IEC 61000-6-4:2006

10/07/2006

IEC 61000-6-4:1997

10/07/2008

Part 2 – Product Family and Equipment Standards

1

2

3

4

7

8

9

10

Serial

Applicable Standard

Title of Standard

Publication Date

Brief description of equipment to which standard should apply

Standard being replaced

Expiry Date of replaced standard

Remarks

3

AS/NZS CISPR 11:2011

Industrial scientific and medical (ISM) radio-frequency equipment – Electromagnetic disturbance characteristics – Limits and methods of measurement

30/11/2010 (AU)

10/12/2010 (NZ)

Industrial scientific and medical (ISM) radio-frequency equipment

AS/NZS CISPR 11:2004

Ed 2

17/11/2013

The 900 ISM band for Australia is 915-928 MHz, not 902-928 MHz as shown in the standard. 900 MHz ISM devices operating outside 915-928 MHz cannot be used in Australia.

AS/NZS CISPR 11:2004

(2nd Edition)

25/11/2004

AS/NZS 2064

21/12/2007

CISPR 11:2010

(CISPR 11:2009 + A1(2010)

Edition 5.1 )

19/05/2010

CISPR 11:2003 + A1 (2004) + A2 (2006)

17/11/2013

CISPR 11:2003

+ A1 (2004) + A2 (2006)

06/2003

CISPR 11

21/12/2007

EN 55011:2009 +A1:2010

EN55011:2009

01/07/2013

4

AS/NZS CISPR 12:2013

Vehicles, boats and internal combustion engine driven devices – Radio disturbance characteristics – Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices

20/06/2013

Land based vehicles (including electric powered vehicles), boats and devices with internal combustion engines

AS/NZS CISPR 12:2009

20/06/2015

AS/NZS CISPR 12:2009

22/06/2009

AS/NZS CISPR 12:2006

04/10/2012

EN 55012:2007/A1:2009

EN 55012:2007

01/07/2012

CISPR 12:2009 (Ed 6.1)

10/03/2009

CISPR12:2007

14/10/2014

CISPR 12:2007

23/05/2007

CISPR 12:2001

23/05/2009

5

AS/NZS CISPR 13:2012

Sound and television broadcast receivers and associated equipment – Radio disturbance characteristics – Limits and methods of measurement

27/06/2012

Sound and television broadcast receivers, set top boxes, radio receivers, satellite receivers, analog and digital, DVD players, Video recorders, CD players, audio amplifiers, surround sound equipment

AS/NZS CISPR 13:2004

27/06/2014

AS/NZS CISPR 13:2004 to expire 27/06/2014

Note: Compliance to for equipment to CISPR 13 can be met through compliance with CISPR 32 (see 8A below)

AS/NZS CISPR 13:2004

06/06/2004

AS/NZS 1053

21/12/2007

EN 55013:2001
/A2:2006

EN 55013:2001
+ A1:2003

01/03/2009

CISPR 13:2009 (Ed 5)

29/06/2009

CISPR 13:2006

14/10/2014

CISPR 13:2006

(Consol. CISPR 13:2001 +A1 (2003) + A2 (2006))

2001

CISPR 13

21/12/2007

6

AS/NZS CISPR 14.1:2013

Electromagnetic Compatibility – Requirements for household appliances, electric tools and similar apparatus – Part 1: Emissions

20/06/2013

Household appliances, power tools, battery operated tools, electric and electronic toys, heating appliances, kitchen machines, motor operated appliances

AS/NZS CISPR 14.1:2010

24/06/2015

AS/NZS CISPR 14.1:2010 will expire 24/06/2015

EN 55014-1:2006/ A1:2009 will expire 16/08/2014

AS/NZS CISPR 14.1:2010

03/03/2010

AS/NZS CISPR 14.1:2003

04/10/2012

EN 55014-1:2006/ A2:2011

2006

EN 55014-1:2006 + A1:2009

16/08/2014

EN 55014-1:2006/ A1:2009

2006

EN 55014-1:2006

01/05/2012

CISPR 14-1:2009

(Consol. Ed of CISPR 14-1:2005 + A1 (2008))

11/02/2009

(11/11/2005)

CISPR 14-1:2000

+ A1 (2001) + A2 (2002)

21/12/2007

7

AS/NZS CISPR 15:2011

Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment

20/12/2011

Lighting equipment, lighting accessories such as ballasts, transformers, dimmers

AS/NZS CISPR 15:2006

09/02/2013

Testing above 30 MHz mandatory from 9 Feb 2013

EN 55015:2006/A2:2009

EN 55015:2006

/A2:2007

01/03/2012

CISPR 15:2009

(Consolidated edition of CISPR 15:2005 + A1 (2006) + A2(2008))

12/01/2009

(2005)

CISPR 15:2000

21/12/2007

8

AS/NZS CISPR 22:2009

+ A1 (2010)

Information technology equipment – Radio disturbance characteristics – Limits and methods of measurement

01/12/2010

Information technology equipment, modems, fax machines, BPL modems

AS/NZS CISPR 22:2009

04/10/2012

Testing radiated emissions above 1 GHz from 1/10/2011.

Compliance for equipment to CISPR 22 can be met through compliance with CISPR 32 (see 8A below)

AS/NZS CISPR 22:2009

21/08/2009

AS/NZS CISPR 22:2006

01/12/2013

EN 55022:2010 + *AC:2011

2010

EN 55022:2006 and its amendments

01/12/2013

CISPR 22:2005 + A1 (2005) + A2 (2006)

04/2005

CISPR 22: 2003

21/12/2007

CISPR 22: 2008

24/09/2008

CISPR 22:2006

24/09/2010

Contact with us Edison Xia QQ:863253430 Skype: Lucky.dog12 edison_xia(at)126.com

Looking forward to your enquire.

Send your message to this supplier
Send Now

Provide Australian EMC testing for electrical device/Radio Wireless device EMC testing, AS/NZS 4268:2008

Ask Latest Price
Place of Origin :
Shenzhen China
Brand Name :
Australian EMC testing
Model Number :
electrical device/Radio Wireless device
Certification :
SAA, RCM mark, EMC, CISPR
Contact Supplier
Provide Australian EMC testing for electrical device/Radio Wireless device EMC testing, AS/NZS 4268:2008

Shenzhen LCS Compliance Testing Laboratory Ltd.

Active Member
12 Years
Guangdong, Shenzhen
Since 2004
Business Type :
Exporter,TradingCompany,Seller,Other
Total Annual :
$1,000,000-$5,000,000
Employee Number :
200-300
Certification Level :
Active Member
Contact Supplier
Submit Requirement