Special features
* Interface module for
series TLH and LWH position
transducers
* Sensor proximity in the plug
connection
* Interference-free signal
transmission
* standardized output signals
0… 10 V
0… 20 mA
4… 20 mA
* excellent linearity
* extremely low temperature
drift 30 ppm/K (typical value)
* Zero point and range optionally
adjustable or fixed
The signal conditioner supplies
the position transducers
with a highly stable constant
voltage.
The wiper signal is picked off
without load via a high-resistance
input stage and transformed
into a displacementproportional
standardized output
signal.
The excellent linearity, low
temperature drift and sensorproximity
of the signal conditioning
process ensure full
utilization of the outstanding
benefits of the position transducers,
guaranteeing the reliable,
interference-free transmission
of signals even over
long distances.In the adjustable models, the
zero point and range can be
adjusted within wide limits
using spindle trimmers. This
permits standardized output
signals to be adjusted even if
the maximum path of the
transducer is not completely
utilized.
The electronic circuitry is integrated
into a socket to fit the
DIN 43650 appliance plug.
The wide operating voltage
range permits to be supplied
by unstabilized direct voltage
sources. Selected SMD components
with a wide temperature
range guarantee maximum
operating reliability even
under extreme environmental
conditions.
The MUW is connected by
means of a four-pole terminal
strip. It is possible to orient
the connecting cable as required
by turning the housing
insert in 90° steps.
MUW 200