Features and Applications |
Small size and stainless steel material; |
Able to measure the force from three dimensions at the same time and the mutual interference among three dimensions is very small; |
Mainly used for force measurement analysis of tools from three dimensions during the process of milling or grinding machine, and the three-axis force measurement of robotic polishing; |
The mutual interference among three dimensions is smaller than 5%. |
Technical Specification Sheet | |||
Capacity | X: 5/10/20/50KG Y: 5/10/20/50KG Z: 5/10/20/50/100KG | ||
Rated Output | 1.0 ~ 1.5mV/V | Material | Stainless Steel |
Zero Balance | ± 2%F.S. | Insulation | ≥5000MΩ/100VDC |
Non-linearity | 1.0%F.S. | Recommended Excitation | 5 ~ 10V |
Hysteresis | 1.0%F.S. | Maximum Excitation | 15V |
Repeatability | 1.0%F.S. | Compensated Temp Range | -10 ~ 60℃ |
Creep(30min) | 1.0%F.S. | Operating Temp Range | -20 ~ 80℃ |
Temp Effect on Output | 0.5 %F.S./10℃ | Safe Load Limit | 120% |
Temp Effect on Zero | 0.5 %F.S./10℃ | Ultimate Load Limit | 150% |
Input Impedance | 385 ± 10Ω | Cable Size | Φ6 × 2m |
Output Impedance | 350 ± 5Ω | ||
Wire Connection | 12 Pin Connector |