8-Port 10/100Base-Tx and 2-Port 1000Base-Fx Industrial Grade Managed Fiber Switch
industrial Optical Ethernet switch with 2*1000Mbps SFP ports and 8*10/100Mbps electrical ports. It is designed to meet the various industrial application needs, and provide an industrial Ethernet network communication solution with a high performance-price ratio. OP-GY208’s high availability and reliability, as well as the rich security features, makes it ideal for secure data transmission. It also features powerful Web-based, CLI management capabilities, wide input range dual power supply and its support for DIN rail and panel mounting for installation in the industrial enviroment.
Key Features
-
8x10/100BaseTX Ports + 2x1000BaseFX SFP Ports
-
OP Ring Protection (OPRP), Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP) for Ethernet ring protection and quick recovery
-
8K address table for auto-learned unicast addresses
-
4K VLAN, supports 802.1Q, port based, protocol based VLAN, as well as Generic Attribute Registration Protocol (GARP) and GARP VLAN Registration Protocol (GVRP) for flexible network planning and management
-
Flexible load distribution control and fail-over function
-
Manual, static and dynamic port Static and dynamic port aggregation for bandwidth management
-
Port rate limit, broadcast storm control, port mirrring, rich Quality of Service (QoS) features for data traffic control and management
-
Black hole MAC address filtering, static and dynamic MAC address management for network security
-
Access Control Lists(ACL)
-
Secure Shell (SSH) v2.0
-
IGMP snooping
-
SNTP, SMTP
-
SNMP V1, V2c, V3
-
Supports RMON statistics, history, alarm and event
-
Web-based network management interface
-
Supports port and VLAN management
-
On-line firmware upgrade
-
Two privilege level accounts
-
Syslog
-
Dual power input for high reliability
-
DIN rail or panel mounting for easy installation
-
Performance
-
IEEE Protocol:
-
802.3 10Base-T Ethernet
-
802.3u 100Base-TX and 100Base-FX fast Ethernet
-
802.3x Flow Control and Back Pressure
-
802.1p Class of Service
-
802.1Q VLAN Tag
-
802.3ad LACP
-
802.1D-2004 STP
-
802.1w Rapid STP
-
802.1s Multiple STP
-
802.1x
-
Non-blocking store-and-forward shared-memory switch architecture
-
MAC address:8K
-
Network management: Web-based, CLI, Telnet/serial console, windows utility and SNMP management.
-
OP Ring Protection: recovery time within 20ms
-
Firmware upgrade: Web, online
-
Port Configuration
-
RJ45 Port:Auto-negotiation, 10/100Base-T, Full/Half Duplex, Auto-MDI/MDIX, on copper cable of cat5# with operation distance of less than 100 meters.
-
1000Base-FX Optical Port: SFP port
-
Single-mode:20, 40, 60, 80,100, 120Km,optional, depend on your SFP module
-
Multi-mode: 550M
-
Wavelength: 850nm, 1310 nm, 1550nm
-
DOWNLOAD PROGRAM Port: Based serial network management (RS-232), RJ45
-
Alarm output interface: One relay alarm output. Support power, port link and ring network alarm
-
Indicator: Port link, ring fault/abnormity alarm indication 10/100/1000M Rate, run indication
Specification
Technical Parameter: |
Access Method: |
10/100/1000Mbps |
Standard: |
IEEE802.3, IEEE802.3u, IEEE802.3x,IEEE802.1p, IEEE802.1d,IEEE802.1q,IEEE802.1x,IEEE802.1w,IEEE802.1x |
Interface Type |
8*10/100Base-TX Ports and 2*1000Base-FX SPF Ports |
Wavelength: |
850nm/1310nm/1550nm |
Distance: |
Multi-mode:: 550m
Single-mode: 20/40/60/80/100/120Km
CAT5:<100m
|
Fiber Ports: |
1000BaseFX ports (SC/ST/FC/LC connector, optional) |
Power Supply: |
24VDC(18~36V DC) Redundant double power input
Connector: 6 pin terminal
Overload Current Protection
Support dual power backup
Support dual power alarm input
|
input Current: |
<0.24A@24VDC> |
MAC address |
8K |
Network management: |
Web-based, CLI, Telnet/serial console, windows utility and SNMP management |
OP Ring Protection: |
recovery time within 20ms |
Firmware upgrade: |
Web & online |
Operating Temperature: |
-40 ~ +80 ℃ |
Humidity: |
5%~95% (non-condensing) |
Storage Temperature: |
-40~ +85 ℃ |
Dimension: |
60mm (H)* 112mm (W)* 138mm (D) |
House Protection: |
IP40 protection, Aluminium Alloy |
Installation: |
DIN-Rail or wall mounting |
Weight |
760g |
Ordering information
P/N |
Description |
FR-IMC-2F4T-SFP |
4-Port 10/100Base-Tx and 2-Port 100Base-Fx Industrial Grade Fiber Switch |
FR-IMC-2GF4GT-SFP |
4-Port 10/100/1000Base-Tx and 2-Port 1000Base-Fx Industrial Grade Fiber Switch |
FR-IMC-M2F6T |
6-Port 10/100Base-Tx and 2-Port 100Base-Fx Industrial Grade Managed Fiber Switch |
FR-IMC-M2GF8T-SFP |
8-Port 10/100Base-Tx and 2-Port 1000Base-Fx Industrial Grade Managed Fiber Switch |