IEC61032 IEC60529 IP4X Test Probe D
Article NO.:BND-D
Basic Introduction:
1,According to: IEC61032:1997/IEC60529:2001 AND UL
2,P4X Test Probe D ( Test Probe D)is a necessary appliance for domestic and similar electrical appliance of against electric shock protection test.
Technical parameters
1, Test Probe Length :100mm
2, Test Probe Diameter:1.0mm
3,Dam- sphere Diameter:35mm
4,Handle Diameter:10mm
5,Handle Length 100mm
6, According to IEC61032 figure 4 (the Test probe D)
Application:
1, Standard test refers to the joint part can't touch the live parts or approachi to the hazardous parts, 30mm circular baffle cannot enter .
2,In the test requirement for preventing from approaching to the hazardous parts, Test Probe D need to exert a thrust 1±0.1N
Purpose:
This probe is aiming at verifying the basic protection against approaching to hazardous parts.
Note:For the without force products,please use with the dynamometer.