Specification
Sand washing machine
1.High capacity
2.Simple structure
3.Little loss of sand
4.Reasonable structure.
5.Large capacity.
6.Low consumption.
7.Low failure rate.

Application of sand washing machine

This machine is the most widely used one mechanical grading equipment for metal ore washing process, the mineral particles in the slurry were graded according to size, can also be used to wash off the mud mine dewatering operations

Wheel sand washing machine work principle:
When the washing machine is working, the motor will slowly rotate after triangle, reducer, gear reduce the speed, sand and gravel through entering to the wash tank, rolled by the impellers driven, and grinding with each other, to remove the surface impurities covered by sandrock.and destroy water layer which covered in the sandrock. so it is good for dehydration. adding water at the same time,it will form strong water flows.taking away small proportion of foreign and impurities in time. exports from the overflow of wash tank, finish cleaning effect. clean sand will be taken away by the blade, atlast the sandrock pour into the discharge chute throught the rotating impeller, finished the sandrock washing effect.

Sand Washer Performance Characteristics:

1. The structure of the machine is simple. The transmission shaft of the wheel is isolated from the materials with water, which can avoid to destroy the shaft due to the water, sand and other pollutant.

2. The sand washer has obvious advantages than traditional helix sand washer when it is used to wash dinas in gravel pit.

• The erosion of the small dians and fine aggregate is slight. The sand gradation and fineness mesh are up to the standard for Dians for Building and Cobble and Macadam for Building.
• The machine has no wear parts except screen shaft.
• It has a long service life, and needn't repair for a long time

Pre-sale services:
1. Multiple models to choose.
2. Customized products according to your requests.
3. Professional technicians at your side any time.
Services during the sale:
1. Pre-check and safeguard products before delivery.
2. Provide solutions for any possible problems occured.
After-sale services:
1. Assist clients to prepare for the primary construction scheme.
2. Help to install and debug the equipment.
3. Help to train people how to perform the device on site.
4.24-hour Services. Contact us if you have any questions
Main technical parameters: