1.1 machine plant (single 0.3-2.5mm):
1.1.1 combined type resistance welding machine
1.1.2 manual clamping devices: eccentric clamp tray material for the eccentric stress and pressure spring 9-CR-SI materials, pressure springs made of 60 Silicon manganese materials, vacuum quenching, reaching more than 65 degrees of hardness, abrasion resistance, durability, long life characteristics. Material brass clamping base is 62, JAWS made of beryllium and nickel alloys, using NC linear cutting machine tools to make clamping Groove;
1.1.3-wheel mobile devices: round 2, brake wheel 2, made of imported polyurethane;
1.1.4 low-voltage electric control box installation: Omron low voltage electrical apparatus
1.1.5 clearance adjustment device: control distance by scale-reading;
1.1.6 annealing: eccentric clamping, clamping base is 62 brass material;
1.1.7 Magnifier work light;
1.1.8 grinding machine: with safety shield, shock absorbers, 0-60 seconds time delay control;
1.1.9 manual cutting tool: blades made of high speed steel;
1.1.10 welded sled: the axis and the line bearings tie slide, low coefficient of friction, axis and the line bearing Germany INA brand.
Technical parameters
1.2.1 voltage 220/380V
1.2.2 welding power 0.4KVA
1.2. level 3 voltage 0.8-2.5V
1.2.4 weld diameter 0.3-2.5mm
1.2.5 the normal frequency 50HZ
1.2.6 regulation 6 levels
1.2.7 welded carbon content 0.7~0.84% high carbon steel
1.2.8 jaw adjustment range electrodes the initial distance 1.5-5.0MM
1.2.13 welding dissected breaking strength greater than the original breaking strength of steel wire 90% above