C-880

Function features:

*Semi-automatic tire changer with tilt arm

*pneuma-lock,have two direction -vertical and horizontal lock, in order to ensure there's no any movement after lock when operate the tire.

*The horizontal arm use 55mm squre shaft which can ensure the intensity and endurance.

*The mounting head is made of specail steel which is wearable, unpliable and unbreakable.

*The hexangular shaft is made of S41 hex steel, which can avoid the distortion when operate the stiff tire.

*Double-bending technic made the vertical column with high intensity.

*The clamp is made of specail material, be able to bear long time.

*The quick deflate valves are installed in front of / at the rear of the bead breaker cylinder to fasten the speed of the movement of the piston. The one-side of movement can be compeleted in about 2-3 seconds.

*The bead breaker blade adopts the arc design and can rotate in four direction so that it can release the bead brake power better when do the work.

*The width of the bead breaker arm working can adjust two step to make sure brake max 15" tire.

*The pedal assembly adopts the drawer structure in order to remove and maintain expediently.

*The diameter of the clamp control cylinder is 80mm to make sure the clamp power stronger.

*There's rubber plate putting on the lever position to avoid noise and damage the paint when put the lever.

*The raised plate at the bottom of the machine can let the short man operate the machine easily.

*Standard configuration two helper to mount the flat and stiff tire easily.

*Provide exhaust inflation function to help the tire stick against the rim closely very fast.

*Standard configuration hte lifter in order to lift the tire onto the turntable expediently.