With Backlight High Precision ABS New Material 3 In 1 Conductivity Metre :
Instructions Of Conductivity Metre :
First remove the cap and press the "ON/OFF" button to turn on the EC&TDS meter. Then
insert it into the test solution to the water line position and gently agitate to remove the
bubbles in the test solution. Wait for 1-5 seconds till the value is stable, press the "HOLD"
button to lock the value and take it out of the water.
Note: After use, dry the water on the meter tip, cover the cap, and keep it in a safe place.
Detailed Description Of Conductivity Metre :
Our button is hot-press laser welding technology, the button is directly welded to the circuit
board, more stable and durable, withstand hundreds of thousands of presses, rebound
damping is more comfortable, qualitiable.Some cheap EC&TDS meters on the market use
plastic brackets,the position is easily offset, resulting in poor button contact,not displaying
content when you press it, and the plastic material is unstable,will cause the entire button
function out of order.
Technical Parameters Of Conductivity Metre :
Conductivity | 0-9990us/cm |
TDS | 0-9999 ppm |
Degrees Celsius | 0.1-80.0 ° C |
Fahrenheit | 32.0-176.0 ° F |
Accuracy | ± 2% |
Weight | 55g |
Dimension | 154 x 30 x 14 (mm) |