Special microwave oven white electrophoresis paint
Product Introduction :
HS-6060ALB/HS-6600 White Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd.
|
It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal
|
such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products, zinc-aluminum alloy sheet and stainless steel sheet etc.
|
This product features shown below:
①,The appearance of the coating is flat, delicate, smooth, uniform high gloss
②,Good stability of bath can adaptable for a longer updating cycl
③,Strong anti-corrosion properties, good salt spray resistance workpiece edge
④,Excellent leveling coating,good bonding force and compatibility with plastic powde
Main ingredients:
Neutralizing agent: organic acid
|
Matrix resin: polyurethane modified epoxy resin |
Additives: surface active agent, prevent shrinkage cavity agent | Pigment: Titanium pigment, carbon black, kaolin, antirust pigment |
Product quality data:
Project | Technical data | Test standard | ||
Resin (HS-6060ALB) |
White Paste (HS-6600) | |||
pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
Conductivity | 25℃, μs/cm | 1400±400 | —— | HG/T 3334 |
Appearance | —— | Milky white liquid | White viscous liquid,no agglomeration | Visual |
Storage stability | No stratified state, and there were no obvious difference compared to before storage |
In 5-35 ℃ temperature 1 year |
Note: pH, conductivity measurement in the resin/pure water = 1:1 dilution
Product film performance:
Project | Indicator | Test standard | |
Appearance | Normal / abnormal | Normal | Ocular estimate |
Hardness | ≥ | 2H | GB/T 6739 |
Cup drawing | mm ,≥ | 6 | GB/T 9753 |
Adhesion | Level | 0 | GB/T 9286 |
Flexibility | mm | 1 | GB/T 1731 |
Impact | kg·cm | 50 | GB/T 1732 |
Gloss | 60 | 50-85 | GB/T 9754 |
Water resistance | h,(23±2)℃,≥ | 240 | GB/T 1733 |
Acid resistance | h,(50g/L H2SO4),≥ | 72 | GB/T 9274 |
Alkali resistance | h,(50g/L NaOH),≥ | 48 | GB/T 9274 |
*Salt spray resistance | h,(film thickness ≥ 20μm) ,≥ | 1000 | GB/T 1771 |
* Note: The substrate use the Bonder standard phosphating steel panel, crossed out unidirectional expansion eclipse ≤ 2mm.
Construction equipment:
Cathodic electrophoretic coating construction in the electrophoresis tank, so need to have the following equipment:
Electrophoresis tank
Circulation devices (including filter, fill the paint device)
DI water equipment
DC power supply and the power supply unit
Anode box (tube) and circulation device
Ultrafiltration device
Cleaning devices
Heat exchanging equipment
Curing device