• Brand
  SAMSUNG
• Model
  LTM230HL08

• Diagonal Size
  23.0 inch
• Type
  a-Si TFT-LCD, LCM

• Pixel Format
  1920(RGB)×1080 [FHD]
• Configuration
  RGB Vertical Stripe

• Active Area
  509.184(H)×286.416(V) mm
• Outline Dim.
  533.2(H)×312(V) ×11(D) mm

• Bezel Area
  513.8(H)×291.0(V) mm
• Treatment
  Antiglare (Haze 25%), Hard coating (3H)

• Luminance
  250 cd/m² (Typ.)
• Contrast Ratio
  1000:1 (Typ.) (TM)

• View Direction
  Symmetry
• Response Time
  12 (Typ.)(G to G)

• Viewing Angle
  89/89/89/89 (Typ.)(CR≥10)
• Operating Mode
  PLS, Normally Black, Transmissive

• Support Color
  16.7M 72% NTSC
• Light Source
  WLED [12S3P] , 40K hours , W/O Driver

• Weight
  2.30Kgs (Max.)
• Designed For

• Frame Rate
  60Hz
• Touch Panel
  Without

• Interface Type
• 30 pins LVDS (2 ch, 8-bit) , Connector

• Power Supply
• 5.0V (Typ.)

• Environment
• Operating Temperature: 0 ~ 50 °C ; Storage Temperature: -20 ~ 60 °C

LTM230HL08 is a 23.0" diagonal a-Si TFT-LCD display panel product from Samsung Display Co., Ltd. (hereafter called SAMSUNG), with an integral WLED backlight system, without backlight driver, without touch screen. It features an operating temperature range of 0 ~ 50°C , a storage temperature range of -20 ~ 60°C . It's general features are summarized by einklcd in the following: Antiglare Surface, Wide Viewing Angle, Landscape type, White LED Backlight, Wide Aspect Ratio, Signal Interface Position Reverse , TCO 6.0 Compliance. Based on its features, einklcd recommend that this model be applied to Desktop Monitor etc. According to the information stored in einklcd this model mass production on Q3, 2013, Now this model is discontinued. We inputted this model's specification on Jul 12 2013 for the first time, and the latest update on Aug 2 2019. If you want to embed the LCM in your future product, einklcd strongly recommend that you should contact with SAMSUNG or it's agent to learn lateast production and specification detail of LTM230HL08. The production status marked on einklcd.com is for reference only and should not be used as the basis for the user's decision making.