CPT 5.7inch industrial lcd display panel 40pin 220cd/m2 640*480 139PPI CLAA057VC01CW

• ManufacturerCPT
• Model NameCLAA057VC01CW

• Screen Size5.7 inch
• Screen TypeLCM, a-Si TFT-LCD

• Pixel Number640(RGB)×480 (VGA) 139PPI
• ArrangementRGB Vertical Stripe

• Active Area(mm)116.16 × 87.12 (H×V)
• Outline(mm)127 × 100 × 6.9 (H×V×D)

• Bezel Area(mm)118.96 × 89.92 (H×V)
• TreatmentAntiglare, Hard coating (3H)

• Luminance220 cd/m² (Typ.)
• Contrast Ratio300 : 1 (Typ.) (TM)

• Viewing Angle70/70/45/55 (Typ.)(CR≥10)
• Response30 (Typ.)(Tr+Td) ms

• Good View at6 o'clock
• Work ModeTN, Normally White, Transmissive

• Color Depth262K 50% NTSC
• BacklightWLED , 30K hours , With LED Driver

• Mass110g (Typ.)
• Refresh Rate-
• TouchscreenWithout
• Signal Type
• TTL (1 ch, 6-bit) , 40 pins Connector

• Voltage Supply
• 3.3V (Typ.)

• Max. Ratings
• Storage Temp.: -40 ~ 90 °C Operating Temp.: -30 ~ 85 °C ; Vibration Level: 2.9G (28.4 m/s²)

The CLAA057VC01CW is a 5.7 inch diagonal a-Si TFT-LCD display panel product from Chunghwa Picture Tubes, LTD. (hereafter called CPT), with an integral WLED backlight system, With LED Driver , without touch screen. It features an operating temperature range of -30 ~ 85°C , a storage temperature range of -40 ~ 90°C , and the maximal vibration level of 2.9G (28.4 m/s²). It's general features are summarized by Einklcd in the following: Wide Temperature, 3G Vibration, WLED Backlight, With LED Driver, U/D,L/R Reverse, Matte . Based on its features, Einklcd recommend that this model be applied to Industrial etc. According to the information stored in einklcd this model mass production on Q2, 2010, Now this model is discontinued. We inputted this model's specification on Oct 20 2012 for the first time, and the latest update on Aug 22 2017. If you want to embed CLAA057VC01CW LCM in your future product, Einklcd strongly recommend that you should contact with CPT or it's agent to learn lateast production and specification detail. The CLAA057VC01CW production status marked on einklcd.com is for reference only and should not be used as the basis for the user's decision making.