EK keeps looking for valuable distributors and partners around international markets…

Pharmaceuticals,Medical and Health ,Precision electronics-EKDX Direct Expansion Air Handling Units

EK's DX air handling unit is a medium-to-large scale air conditioning equipment that integrates air supply, cooling,heating, humidification, dehumidification, air purification and electric control. It is a direct evaporation-type unitwith multiple advantages such as simple system

composition, easy installation and low cost. It can be used in a wide range of clean technology field requiring of small high-clean spaces of tens to hundreds of square meters such as precision electronics,pharmaceuticals, bioengineering, medical and health, food, cosmetics and military industries.

EK's DX air handling unit is characterized by beautiful appearance, convenient layout, flexible use, high pressure resistance, high energy
efficiency, etc. It can provide professional automatic control schemes on request to achieve precise, economical and stable operation of
the unit. With complete models and flexible combinations, the unit can adapt to a wide temperature range of -30°C to 48°C outdoors, thus
fully meeting the different needs of various regions and industries.

■ The unit has a simple design and easy control, and is suitable for independent use.

■ The indoor unit can be directly mounted to the ceiling or in an attached room, not requiring a special air-conditioner room.

■ No chilled or cooling water system is required. The control is simple. The project can be completed phase by phase at a low construction cost.

■ The maintenance is simple. Maintenance of a single unit requires only the space of the clean room.

■ The unit can run at temperature ranging from -10°C to 48°C.

Specifications

Note:
■ Rated cooling capacity is measured under indoor dry/wet bulb temperature of 27°C/19°C and outdoor dry/wet bulb temperature of 35°C/24°C; rated heating capacity is measured under indoor dry bulb temperature of 20°C and outdoor dry/wet bulb temperature of 7°C/6°C;

■ Nominal cooling capacity does not consider the heating loss of the fan motor of the IDU; the external static pressure can be determined according to customer requirements, and the power of the air supply motor will change accordingly;