Straight and Reducing Tee Black painting ,shot blasting Seamless And Semi Seamless Buttweld Seamless Pipe Fitting

Product Description:

2. Carbon steel tee producing process is very easy . Firstly ,we need cut the pipe into pieces and then put the pipe into the cold forming tee machine and after finishing the tee ,we will need to cut the cap , do heat treatment and beveling , shot blasting , and marking . For the carbon steel tee ,we can make the carbon steel tee according to client requirement . All pipe fittings which form cold process need to do heat treatment. After heat treatment , the quality of the carbon steel tee will be much better and the structure of the material will be much steady .

Product Show

Company information:

Our company is producer and exporter of all kinds of carbon steel pipe fittings.Our city is the hometown of carbon steel pipe fittings.everyday lots of containers of fittings are dispached all over the world,such as Russia,Egypt,Malaysia,India,Turkey,Indonesia,Jordon and some other overseas markets.Our company monthly dispach around 50containers fittings.We provide our customers with one-stop service from order to delivery.

Size detection

Measuring diameter: measure the outside diameter of main branch pipe of tee with calipers (outside diameter is measured by circumferential method) and inside diameter at least 3 points at each end to ensure that the main outside diameter, inside diameter, outside diameter of branch pipe and inside diameter meet the standard requirements.

(2) measuring the length of the main pipe: measure the length of the main pipe of the tee with square ruler and straight ruler, at least 2 places.

(3) measuring center height: measure the vertical distance between the branch pipe and the inner slope of the main pipe with a ruler and a square ruler, and make sure that the center height of the tee is half of the main pipe's outer diameter.

(4) measurement of bevel Angle: use universal Angle ruler and ruler to measure the bevel and blunt edge of the main branch pipe end of the tee, which should meet the design requirements of the drawing.

(5) measurement of skew: place the tee in the bending plate so that the main branch pipe rests on the bending plate respectively. Measure the clearance between the bending plate and the end face of the tee with a ruler or a plug, and the value shall meet the standard requirements.

tee role:

Tee for pipe fitting, pipe connection.Also called pipe fitting tee or tee pipe fitting,

Stainless steel equal diameter tee

Stainless steel equal diameter tee

Tee joint, used at the main branch pipe.

Three - way is with three openings, namely an import, two exports;Or a chemical pipe fitting with two inlet and one outlet, having t-shaped and y-shaped, equal diameter pipe orifice, and reducing pipe orifice, for use at the junction of three identical or different pipelines.The main function of the tee is to change the direction of the fluid.

Contact me:

Darcy Dong

Whatsapp/ Wechat: 008615630731167

Guozhong International Limited