ELECMAN ® UL1242 IMC 90 Degree 1/2" to 4" Elbow HDG Threaded IMC Bend IMC Elbow

Applications

ELECMAN® UL1242 IMC 90 degree 1/2" to 4" elbow HDG threaded IMC bend IMC elbow is to connect the IMC pipes to change the way of the cable route. IMC Elbows allow 90 degree bends on corners saving time and material costs. Wire pulling is effortless with the smooth galvanizing and there are absolutely no sharp edges on any surfaces that could snag, scratch or break the wiring as it is being pulled through the raceway. It is damage-resistant for electrical conductors and cables.

Features

• Enables a 90°or 45° change of directions in a run of IMC conduit.
• The large radius for easy wire pulling.
• Indoor or outdoor application.

Certifications and Compliances

ELECMAN® UL1242 IMC 90 degree 1/2" to 4" elbow HDG threaded IMC bend IMC elbow shall be carbon steel, electrically welded, galvanized and produced to the following specifications:

• Listed to Underwriters Laboratories Safety Standard UL1242.
• Manufactured in accordance with ANSI C80.6.
• Threaded ends (NPT).

Specification Data

ELECMAN provides full size UL1242 IMC 90 degree 1/2" to 4" elbow HDG threaded IMC bend IMC elbow.

Quality Control

Every ELECMAN people know deeply the core value of ELECMAN is to provide high quality products to customers, that is why ELECMAN QC departments have very strict quality controlling process, from raw material to products, ELECMAN QC department supervise every process, make sure every process follow the standard, for UL1242 IMC elbow, QC department need to inspect the dimensions, welding line, zinc coatings and bending feature.

Packing Information

Packing is so important, good packing can help customers to improve the brand image, good packing also can help customers to stock the products well for longer time, so ELECMAN pay much attention to that, for IMC elbows, from 1/2" to 4", ELECMAN provide IMC elbows are packed in small carton box or self sealing plastic bag . ELECMAN can follow any packing requirements of customers.