ZBW(YB)17-10 Series HV/LV Prefabricated (American type)Substation
Applications
The combined American box change is a transformer body, high voltage load switch, fuse and other components.
It is placed in the transformer oil tank. Because it is immersed in oil, the volume of the components is greatly reduced, the structure is more compact, and the installation is convenient and flexible. Fully insulated, fully sealed structure, safe and reliable, easy to operate, maintenance free. Widely used in residential quarters, high-tech centers, factories and mines, airports, stations, schools.
General requirements:
1.Simple lighting,public power distribution,the case into the high-voltage wiring scheme does not need to set high-pressure measurement,only low-pressure measurement or no measurement,no compensation.Feeding circuit 4-6 back,the use of plastic circuit breaker control and protection.
2.Power lighting,public power distribution,the box transformer with a change in the circuit has increased to 8 to 12 back,in addition,there should be reactive power compensation.
3.Box-type transformer substation covers small footprints,General box-type transformer substation covers an area of only 5 to 6 square meters,or even reduce the 3 to 5 square meters.Suitable for general load-inensive industrial and mining enterprises,ports and residential quarters and other places,can be extended.
Normal conditions of use
Altitude: not exceed 1000m;
Ambient temperature:-35oC~+40oC
Relative humidity: daily average of not more than 95%, on average less than 90%;
Installation place: no fire, explosion, chemical corrosive gas and well-ventilated place, the ground angle of not more than 3°.
Product Features
Overload capacity strong,allowing overload 2 times 2hours,overload 1.6 times 7 hours without affecting the life of the box change.
Adopt elbow plug connector,high-voltage cable can be very convenient joint into the connection,and in emergency situations as a load switch to use,can live plug.
Double-fuse protection,plug-in fuse(BAY-o-net) for the double-sensitive fuse temperature,current) protectionbox secondary side of the short-circuit failure occurred.
The back-up current limiting fuse(ELSP) protects the cabinet from internal faults and protects the high-voltageside.
Scope of application:
1.Urban public power distribution system,in the residential area,when downtown street load increases,and need to increase the transformer capacity.
2.Temporary power supply of construction site:existing buildings,the need to transformer or increase the use of electrical equipment,field operations and outdoor workplace power supply,such as oil,mining,port terminals,stations and so on.
Technical parameters | |
Rated voltage | 10/0.4kv(HV/LV) |
Maximum working voltage | 12(HV) |
Rated frequency | 50Hz |
Rated capacity | 50-1600kVA |
Withstand voltage(1 min working) | 35kV |
Lightning impulse voltage | 75kV |
Cooling method | oil immersion self-cooling |
High voltage | 50kA |
backup fuse switching on current | |
on-off current of the plug fuse | 2.5 |
environment temperature | -35℃ to 40℃ |
Coil temperature | 62 ℃ |
No load voltage | ±5% ±2x2.5% |
Noise level | 50db |
Protection level | IP43 |
WHY Hengfengyou
1. One of the drafters of the National Standard Mine Flameproof Mobile Substations (GB/T 8286-xxxx ), which will replace the existing national standard (GB/T 8286-2005 ) and it was submitted for trial in Beijing.
2. +20 years experience R&D team, derived from a 60 years of history transformer manufacturer in Changsha, Hunan, China since 1956.
3. Full range of transformer types with customized functions are available.
4. CE & ISO certificated.
Sales Manager Sasha/shicheng Whatsapp :+8615898873365