LCD Gauge Automobile Car Universal Speed Meter Water Oil Temp Digital Display

• Product Parameter

Product Description

✮ Show 13 parameters !
can be used the operation key to select speed , water temperature , turbine , exhaust temperature , oil temperature , oil pressure , intake air temperature , air-fuel ratio , battery voltage , G value , throttle opening , speed , intake pressure , etc .parameter . After clicking the OK button to save , you can exit the setting .

✮ Dial Function
Use the operation keys to select single , double mode , after selecting the double mode , there are double pointers and pointers plus numbers for choosing .After clicking the OK button to save , you can exit the setting interface .

✮ Pointer Function
The interface displays single gauge , upper gauge , and gauge below . Use the remote control operation key to select .Click the ok button to display 7 different colors , and you can switch colors as you wish . After clicking the OK button to save , you can exit the setting interface .

✮ Alarm Function
Select the upper and lower table with the operation key , then enter the setting interface of alarm MAX and MIN , adjust the alarm value through the MAX and MIX key , use the up and down keys to debug the settings of MAX and MIN .click OK to save the setting , and finally press ESC to exit the setting interface .

✮ Racing Function
You can use the operation key to select0-100 /0-200 /100-200 / 0-400 andclick the OK button to save and test separately .

✮ Fit OBDII and Sensor
Oil temperature , oil pressure and boost , these three parameters through OBDII can't be read out and must be connected to the sensor . There are two main types of auto meters on the market , the OBD meter and the sensor meter , and they are not universal . It's also hard to make both universal because it's technically difficult .But we have already made it into one gauge .It saves the car owner a lot of trouble .

✮ Remote Control
As we know , it is impossible to display all the parameters of the engine in one gauge at the same time , because it would make the OBD unable to bear such a large bandwidth .So gauges that claim to show all parameters at the same time are fake ones . So we can only display two parameters at a time , if you want other parameters , with the remote control to switch .