Racing RPM Car Gauges Universal OBD2 Auto Meter Tachometer Gauge LCD
Type | Liquid crystal gauge |
Material | Aluminum frame |
13 Driving Parameters | RPM , water temperature , turbo , exhaust temperature , oil temperature , oil pressure , intake air temperature , air-fuel ratio , battery voltage , G value , TPS , speed , intake pressure . |
Screen | LCD |
OEM | YES |
Product Description
1 . One LCD Racing Gauge Reads 13 Driving Parameters
RPM , water temperature , turbo , exhaust temperature , oil temperature , oil pressure , intake air temperature , air-fuel ratio , battery voltage , G value , TPS , speed , intake pressure .
2 . Support Plug and Play OBD Reading , Sensor is Optional
Turbo pressure , water temperature , oil temperature , oil pressure , G-value sensor , etc are optional
(WINDBOOSTER sensor and OBD interface can be used simultaneously , and the gauge will preferentially read data from the sensor)
3 . Inverted Function
When installing the gauge on the windshield , you can turn on the inverted mode , which is convenient for you to read the
parameters .
4 . Several Gauges Installed in Series
LCD racing gauge supports multi-gauge in series , and can also be installed in series with Windbooster pointer racing
gauge(Recommended to connect no more than 5 in series , specific connecting wire is required for mixed connection in series)
5 . 7 Pointer Colors Are Available
There are 7 different colors for the pointer , you can switch colors as you wish
6 . Monitoring Alarm Function
Support MAX , MIN value adjustment , when the driving parameters exceed the set MAX , MIN , the indicator light flashes and the buzzer issues an alarming signal .
7 . Appearance Design
All-aluminum body , metal texture , Ultra-thin LCD , support folding
8 . Other Features
A total of 6 colors available; 4 different dial plate interface styles available; 2 dial modes available(single gauge , double
gauge mode); remote control operation , support Chinese /English .
1 . Connect the gauge to the cable box;
2 . After ensuring that the gauge and cable box are connected , start the car;
3 . Connect the cable box to the OBD interface of the car . At this time , the gauge is powered on and self-tested .
4 . Wait for the gauge to display the data normally and the installation is completed .