52mm Gauge OBD2 Car Meter Medidor Boost Car Rpm Set Digital Speedometer Auto Parts

Product Description

✮ Show 13 parameters !
can be used the operation key to select speed , water temperature , turbine , exhaust temperature , oil temperature , oil pressure , intake air temperature , air-fuel ratio , battery voltage , G value , throttle opening , speed , intake pressure , etc .parameter . After clicking the OK button to save , you can exit the setting .
✮ Dial Function
Use the operation keys to select single , double mode , after selecting the double mode , there are double pointers and pointers plus numbers for choosing .After clicking the OK button to save , you can exit the setting interface .
✮ Pointer Function
The interface displays single gauge , upper gauge , and gauge below . Use the remote control operation key to select .Click the ok button to display 7 different colors , and you can switch colors as you wish . After clicking the OK button to save , you can exit the setting interface .
✮ Alarm Function
Select the upper and lower table with the operation key , then enter the setting interface of alarm MAX and MIN , adjust the alarm value through the MAX and MIX key , use the up and down keys to debug the settings of MAX and MIN .click OK to save the setting , and finally press ESC to exit the setting interface .
✮ Racing Function
You can use the operation key to select0-100 /0-200 /100-200 / 0-400 andclick the OK button to save and test separately .
✮ Fit OBDII and Sensor
Oil temperature , oil pressure and boost , these three parameters through OBDII can't be read out and must be connected to the sensor . There are two main types of auto meters on the market , the OBD meter and the sensor meter , and they are not universal . It's also hard to make both universal because it's technically difficult .But we have already made it into one gauge .It saves the car owner a lot of trouble .
✮ Remote Control
As we know , it is impossible to display all the parameters of the engine in one gauge at the same time , because it would make the OBD unable to bear such a large bandwidth .So gauges that claim to show all parameters at the same time are fake ones . So we can only display two parameters at a time , if you want other parameters , with the remote control to switch .

• Product Parameter

Installation
The LCD racing gauge and OBD cable interface need to be prepared before installation . Once connected , the gauge can read various driving parameters through OBD interface . CAMMUS LCD gauge provides RPM , Water Temperature , Turbo , Exhaust Temperature , Oil Temperature , Oil Pressure , Intake Air Temperature , Air-fuel Ratio , Voltage , G-value , TPS , Speed , Intake Pressure and other parameters . And several gauges can be connected in series , communicates with the original car through OBD cable . Due to vehicle OBD speed limit , it is recommended to connect no more than 5 in series .
Installation Steps :
1 . Connect the gauges in series and connect the gauge to the cable box;
2 . After ensuring that the gauge and cable box are connected , start the car;
3 . Connect the cable box to the OBD interface of the car . At this time , the gauge is powered on and self-tested .
4 . Wait for the gauge to display the data normally and the installation is completed .