IEC61000-4-5 Lightning Surge Generator 1.2/50µs , 8/20 µs Combination Wave Built-in CDN

1. Introduction:

Lightning surge generator is designed according to IEC61000-4-5 and GB/T17626.5,the lightning surge generator can generates both 1.2/50, 8/20 µs combination wave. The test voltage is up to 6KV, user can choose and define the test levels. The parameters of waveform for surge voltage and waveform for surge current is strictly meet the standard requirements of IEC61000-4-5. It is widely used in the fields of industry control equipment, house-holding appliance,medical electronics, communications electronics,components, auto control equipment and etc.

Lightning surge generator is to simulate the surge voltage caused by switching transient and lightning transient, the surge test is to found out the surge voltage effect to EUT in normal working condition.

The Lightning surge generator is built in a 300V/10A coupling and decoupling network.

EMC Test equipment includes: EMI receiver, ESD generator, surge generator, electrical fast transient generator, voltage dips short interruptions and voltage variatins generator, ring wave generator and etc.

2. Features:

1). 7 inches LCD touch screen, with plentiful functions, easy to operation and update the software.

User can design the test program, and has 1000 groups memories.

2). Monitoring the surge voltage and current waveform by work with an external oscilloscope.

3). Built in single phrase 10A (16A) network, makes the equipment smaller and convenient.

4). With high-strength plug in the panel, EUT can connect with the equipment convenient and reliable.

5). Monitoring the work voltage and current of the EUT. Overvoltage protection and overcurrent protection.

6). Intelligent test the surge output, warning at voltage error and no output.

7). Intelligent judge the abnormal of high voltage and surge output.

3. Parameters: