IEC60529 IP1X IP2X IP3X IP4X Test Finger Probe with Third-lab Calibration Certificate

1. Introduction
The IP code test probes are designed accoring to IEC60529 and IEC61032 standard. It includes test probe A (Sphere:Φ50 with handle) for IP1X test, test probe 1 (Sphere: Φ50) for IP10 test, test probe B (Jointed test finger) for IP2X test, test probe C (Rod: Φ2.5-length 100) for IP3X test, test probe D (Wire: Φ1.0-length 100) for IP4X and test probe 2 (Sphere: Φ12.5) for IP20 test. All the probes can provide with a third-lab calibration certificate which authorized by ISO17025 Lab.

2. Specification

1). Test probe A (Sphere:Φ50 with handle) for IP1X test
Test probe A ( Φ50 sphere with handle) is designed according to IEC61032 fig.1, and meet the requirements of IEC60529 regarding IP1X testing and IEC60065. This probe is intended to verify the protection of persons against access to hazardous parts. Test probe A with 50N force is means for the protection of person’s back of hand from hazard parts.

2). test probe 1 (Sphere: Φ50) for IP10 test
Test probe 1 (500g test sphere) is designed according to IEC61032 figure 5, meet the requirement of IEC60529-IP. The diameter of the sphere is 50mm+0.05. Test probe 1 is for IP1X testing, it means for the protection against solid foreign objects of Φ50mm or greater.

3). test probe B (Jointed test finger) for IP2X test
Introduction:

Test probe B ( jointed test finger) is design according to IEC61032 figure 2, meet the requirements of UL507, UL1278 figure 8 and EN60529 figure 2. Test probe B with 10N force is for IP2X testing, it means for the protection of person’s finger from hazard parts.

4. test probe C (Rod: Φ2.5-length 100) for IP3X test
Test probe C (test rod) Designed according to IEC61032 figure 3, meet the requirements of IEC60529-IP3, IEC60065,IEC60598 and etc.
Test probe C is for IP3X testing, it means for the protection against solid foreign objects of Φ2.5mm and greater. Test probe C with 3N force is for IP3X testing, it means for the protection of person’s tool from hazard parts.

5.test probe D (Wire: Φ1.0-length 100) for IP4X
Test probe D (Test wire) Designed according to IEC61032 figure 4, meet the requirements of IEC60529-IP3,IEC60065,IEC60598 and etc.
Test probe D is for IP4X testing, it means for the protection against solid foreign objects of Φ1.0mm and greater. Test probe D with 1N force is for IP4X testing, it means for the protection of person’s wire from hazard parts.

6. test probe 2 (Sphere: Φ12.5) for IP20 test
Test probe 2 (15g test sphere) Designed according to IEC61032 figure 6, meet the requirement of IEC60529-IP2. The diameter of sphere is 12.5+0.2. Test probe 2 is for IP2X testing, it means for the protection against solid foreign objects of Φ12.5mm or greater.