MachineU > China Products > Beauty & Personal Care > Beauty Equipment > Beauty Salon Equipment > IPL Machine
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester
Specifications
Brand Name :
PEGO GROUP
Model Number :
IPX12A
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
USD6000~USD15000
Payment Terms :
T/T, Western Union, MoneyGram
Delivery Time :
30 working days
Packaging Details :
woodencase
Standard :
IEC60529
Material :
stainless steel and aluminum
Application :
outdoor lightings, household appliance
IP Grade :
IPX1 and IPX2
Warranty :
12 months
Control system :
PLC+ touch screen
Description

IP01 / IP02 Dripping Water Resistance Environment Test Equipment PLC Control

1. Introduction

1. Commodity IPX1-2B Vertical Drip Box Test Machine
2. Model IPX12B-1000
3. Description

Application Background: The water from the nature (rainwater, seawater and river water and etc.) would cause damage to products and material. The damage includes corrosion, color fading, deform, strength degradation, mildew and so on. Especially, it will make the short circuit to electronic products. So waterproof testing is a must test for some special products and materials.

Application; outdoor lighting, household appliance, auto spare parts and other electronics products.
Function: This machine is mainly applied to simulate the equipment (like electronic products, lighting, electronic components, automobile, motorbike and its spare parts) under the raining conditions, and to check if its physical and other relative performances can reach the requirements.
4. Standard Meet the requirements of IEC60529:1989+A1:1999+A2:2013, GB4208-2008 Clauses 14.2.1 and 14.2.2 and figure 3, GB7000.1 clauses 9.2.3.
5. Characteristics

● For IPX1 and IPX2 testing

● Wall-mounted structure: the frame is fixed on the wall to ensure the stability.

● The frame is made by aluminium alloy, turntable is made by SUS304 stainless steel to ensure rustless for long time.

● Drip board: made by stainless steel.

● Cone-sharp brass nozzle with cover to prevent any hurt, easy to change the nozzles,.

● Flow rate: flowmeter with valve, manual adjustable.

● The drip board can up and down adjustment, and will auto stop at the distance of 200mm upper of EUT.

● There is an outlet on the turntable for samples (AC220V, 10A), on-off time can be control by program: off (0~999min)-on (0~999min)-off (0~999min).It is apply to live test.

● With air compression function to dry the drip box to avoid blocking cause by incrustation.

● Adopts step-up motor, the test speed can set up at the touch screen.

● For live test. With power plug in the turntable to power the EUT. The power on and power off time can be set at the control panel: off(0~999min)-on (0~999min)-off (0~999min).

● Control system: 7 inch touch screen + Panasonic PLC.
6. Specification Structure Parameter
Drip board area 1000*1000mm
Outer size 1250*1350*2600mm (L*D*H)
Aperture of drop ￠0.4mm
Pitch-row(mm) 20*20 mm
Diameter of turntable Φ 800mm
Turntable height off ground 500mm
Function Parameter
Delivery Rate 1-5 mm/min(±0.5mm/min)
Flow control way Manual
Height of drip board 500－1800mm adjustable
Turntable lifting range None (fixed)
Turntable bearing 50KG
Turntable height 00 or 150 (horizontal direction)
Turntable Speed 1 r/min(IPX1)
Test Time 0-999 min
Protection device leakage protection, lack water protection, short circuit protection
Electric Parameter
Power supply 220V
Power consumption 1.0 kw
7. Configuration Name Specification Quantity
Case alumininium alloy moulded aluminium 1
Guide rail stainless steel 2
Lifting screw stainless steel T32X6 1
Lifting motor / 1
Drip board stainless steel 1
Turntable Stainless steel
1 batch
Drip needle Φ0.4mm stainless steel 1 batch
PLC controller FR-XO L30R 1
Touch screen 7 inch 1
Turntable step motor 57# 1
Leakage switch 20A/4P 1
Low-voltage apparatus / 3 batches
Relay DC24V 3
Switching power supply 24V, 50W 1
Flowmeter LZT-15 1
Filter 10in single-stage water purifier 1
Pipeline fitting PPR+stainless steel 1
Needle Stainless steel 1
8. Accessories User Manual, Certificate of Quality, Warranty Card, filter element 1pc, Test Needle 100pcs, Yellow brass needle base 20pcs, 3-core Cable (3m)
9. Working Condition User shall provide the below conditions and make the connection
10. Location Request

● Flat floor, Smooth drainage, the floor and wall with water repellent treatment, set the gutter and drainage ditch

● The ground bearing shall not less than 200KG/m2

● With excellent ventilation

● Nonviolent vibration

● Non-strong electromagnetic field

● No flammable, no explosive and no corrosivity substance, no dust

● With appropriate use and maintenance space

● Rear side, left side, right side,: 800mm

● Top: 200mm

● Front side: 1000mm

●Frame and control box’s space, suggest distance: 800-1000mm
11. Environment conditions

Temperature:5℃～35℃

R.H.: ≤85%

Air Pressure: 86kPa～106kPa
12. Power Condition
Voltage, frequency AC220V±10% , 50Hz±10% , ire wire+null line+earth wire
Power Consumption 1.0kW
Earth Resistance <4Ω
Power Switch

● Request to equip with appropriate air switch for the equipment at the site, and the air switch is only work for this equipment

● Forbidden to use knife switch and power plug

● No more than 2m between air switch and equipment
Water Supply

● Request to equip with water supply, and hydraulic pressure shall not lower than 0.2Mpa, and install 4’’ faucet.

● The faucet should be installed at the position away from the equipment no more than 2m.

2. Testing Method Instruction

2.1 IPX1 Testing Method

2.1.1 Connect the water inlet and power well

2.1.2 Press the power switch “ON” to start the device

2.1.3 Open the tap

2.1.4 Find the “WATER MAGNETIC VALVE” button in the “MANUAL” interface, press it to make the drip board full filled with water, and open the control valve of flowmeter to max. to fill tank’s water, observe all the needle tip dropping water means the drip board is fulled with water, then turn down the control valve of the flowmeter to 1L/min of IPX1, close the inlet valve switch.

2.1.5 Put the sample in the turntable base, and adjust the turntable’s height to make the sample enclosure’s top 200mm far away from needle tip.

2.1.6 Enter into the “IPX1/2 AUTO” interface, press the “START” button to begin test

2.1.7 Finished test, turn off the power.

2.2 IPX2 Testing Method

2.2.1 Find the “WATER MAGNETIC VALVE” button in the “MANUAL” interface, press it to make the drip board full filled with water, and open the control valve of flowmeter to max. to fill tank’s water, observe all the needle tip dropping water means the drip board is fulled with water, then turn down the control valve of the flowmeter to 3L/min of IPX2, close the inlet valve switch.

2.2.2 First adjust the turntable to 15°, then put the sample in the turntable base and adjust the turntable height to make the sample enclosure’s top 200mm far away from needle tip.

2.2.3 Enter into the “IPX1/2 AUTO” interface, press the “START” button to begin test

2.2.4 Finished test, turn off the power.

3. Picture

PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester

4. Third-Lab Calibration Certificate

Please download the copy of calibration certificate issued by third-lab which authorized by ISO17025 at our website.

Product tags

iperl water meter problems

,

iperl water meter

,

industrial water flow meter
Send your message to this supplier
Send Now

PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester

Ask Latest Price
Product Detail
Brand Name :
PEGO GROUP
Model Number :
IPX12A
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
USD6000~USD15000
Contact Supplier
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester
PLC Control IP Testing Equipment IP01 / IP02 Dripping Water Resistance Environment Tester

Pego Electronics (Yi Chun) Company Limited

Verified Supplier
7 Years
jiangxi, yichun
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company
Main Products :
Electrical Safety Test Equipment, Environment Test Equipment, Impact Test Equipment
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products IP Testing Equipment
MachineU China Products Beauty & Personal Care Beauty Equipment Beauty Salon Equipment IPL Machine
Contact Supplier
Submit Requirement