MachineU > China Products > Electrical Equipment & Supplies
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench
Specifications
Brand Name :
PEGO Group
Model Number :
PG-PD10A
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Payment Terms :
T/T, Western Union, MoneyGram
Supply Ability :
50 sets/month
Delivery Time :
15 working days
Packaging Details :
woodencase
Standard :
IEC60068-2-75, IEC62262
Material :
steel (hammer), alumimum (test bench)
Test IK level :
IK01 to IK10, IK20 (optional)
Striking Elements :
≤1J，2J, 5J, 10J, 20J, 50J (optional)
Configuration :
striking elements, swing pipe, test bench, mounting fixtures
Release mode :
manual release
Description

Test Eha: IK01 to IK10 Pendulum Hammer Impact Test Apparatus Swing Pipe Combines with Striking Elements

1. Introduction

The IK mechanical impact test apparatus is designed according to IEC60068-2-75 Test Eha and IEC62262 (equivalent EN62262), and can meet the test requirements of IEC60598, EN50102. The IK Code was originally defined in European Standard BS EN 50102:1995 and amended in 1998, following its adoption as an international standard (IEC 62262) in 2002, the European standard was renumbered EN 62262. The IK code is from 00 to 10, and corresponding impact energy is from 0.14J to 20J.

This equipment can perform IK01 to IK10 tests, the swing pipe can be adjusted back and forward, left and right, and the angle also can be adjusted. The hammer for 1J and below tests is made of nylon, and the hammers for IK07 to IK10 tests are made by steel, the working principle is : the sample is placed in normal, then adjust the impact points, and position the impact device, then release the hammer to freely impact the hammer. The impact angle and impact height are adjustable.

For low energy tests (≤1J, IK01 to IK06), there will be a mounting fixture to fix the specimens as per IEC60068-2-75 clause 4.2.2, the mounting fixture is designed according to IE60068-2-75 figure D.3, and applied to fixed the specimens like switches, lampholders, covers, screw glands, plug, sockets and etc..

The test rig is made of aluminum alloy, with four wheels at the bottom, and the whole device can move freely.

2. Parameter

Swing Pipe

Steel pipe 1 (Length: 1000mm, outer diameter: 15.9mm, thickness: 1.5mm) for energies exceeding 2J

Steel pipe 2 (Length: 1000mm, outer diameter: 9.0mm, thickness: 0.5mm) for energies not exceeding 2J

* the mass of steel pipe + combination mass of striking elements=equivalent mass
Impact angle 0~900
Lifting stroke 200-1200mm
Impact hammers

Striking elements: ≤1J/0.25KG for IK01 to IK06 tests, made by nylon

Striking elements: 2J/0.5KG for IK07 test, 5J/1.7KG for IK08 test, 10J/5KG for IK09 test, 20J/5KG for IK10 test, made by steel
Hammer release method Manual release
Mounting Fixtures

1). Completed designed according to IEC60068-2-75 figure D.3, applied for IK01 to IK06 tests

IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench

2). Flat mounting plate for IK07 to IK10 tests, adjustable angle 0-90°, equipped with M6 screw holes

Characteristics 0f Striking Elements
Energy/J

≤1

±10%

2

±5%

5

±5%

10

±5%

20

±5%

50

±5%
Equivalent mass±2%kg 0.25(0.2) 0.5 1.7 5 5 10
Material Nylon steel
R/mm 10 25 25 50 50 50
D/mm 18.5(20) 35 60 80 100 125
f/mm 6.2(10) 7 10 20 20 25
r/mm - - 6 - 10 17
l/mm Depends
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench

Fall Height
Energy/J 0.14 0.2 (0.3) 0.35 (0.4) 0.5 0.7 1 2 5 10 20 50
Equivalent mass/kg 0.25 (0.2) 0.25 (0.2) 0.25 (0.2) (0.2) 0.25 0.25 0 .25 0.5 1.7 5 5 10
Fall height±1%mm 56 (100) 80 (150) 140 (200) (250) 200 280 400 400 300 200 400 500

Degrees of protection against external mechanical impacts

IK01 IK02 IK03 IK04 IK05 IK06 IK07 IK08 IK09 IK10
0.14J 0.2J 0.35J 0.5J 0.7J 1J 2J 5J 10J 20J

Product tags

impact hammer test

,

rebound hammer test report

,

rebound hammer test
Send your message to this supplier
Send Now

IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench

Ask Latest Price
Product Detail
Brand Name :
PEGO Group
Model Number :
PG-PD10A
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Contact Supplier
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench
IK Mechanical Impact Test Apparatus IK01 - IK10 Pendulum Steel Hammer Alumimum Test Bench

Pego Electronics (Yi Chun) Company Limited

Verified Supplier
7 Years
jiangxi, yichun
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company
Main Products :
Electrical Safety Test Equipment, Environment Test Equipment, Impact Test Equipment
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Impact Test Equipment
MachineU China Products Electrical Equipment & Supplies
Contact Supplier
Submit Requirement