Three Phase Digital Power Meter with 600V Voltage and 40A current
1. Introduction of Three Phase Digital Power Meter
The digital power meter is not only used to measure the single-phase measurement function of each input unit, but also the measurement function (∑) function of a wiring group composed of multiple input units. It can be used to test the AC voltage (U), AC current (I), power factor (λ), active power (P), apparent power (S), reactive power (Q), phase difference (Ø) and frequency (FU).
7 windows on the panel simultaneously display various parameters of each phase and the measured singal values are all true RMS values which is also applicable to the wave-distorted signal.
2.Parameters of Three Phase Digital Power Meter
Model | PM9833 |
Accuracy | Class 0.5 |
Voltage | 10V-600V |
Current | 20mA-40A |
Input method | Floating input |
Power factor | 0.001-1.000 |
Frequency | 45Hz-65Hz |
Test method | AC |
Input resistance |
Voltage: about 2MΩ Current: about 0.5Ω, high-4mΩ |
Sample speed | 0.5s |
Display method | 7 windows, white LED display |
AD conversion | 800time/s, sample period 125μ, 24 bits, the voltage and current simultaneous sampling |
Line filtering | Cut-off frequency 2KHz |
Power | AC 110V-240V, 45-440Hz, DC 100V-300V |
Interface | RS232/485 (Option) |
Dimension | 215*132*275mm |
Optional accessories | Support current transformer |
3. FAQ