IEC60598-2-20 Figure Lampholder Contacts Security Test Device for Testing Lighting Chain

1. Introduction

The lighting chains pressure test device is designed according to IEC60598-2-20 clause 20.12.4 figure 2 and GB7000.9 clause 11.3 figure 2. It’s applied for checking security of lampholder contacts in push-in lampholder of the lighting chains, to avoid the displacement of lampholder contacts due to friction, so that the live part of the lighting chains become accessible.

2. Test method

Six lampholders are heated for 7 hours to reach the highest temperature, after the lampholders have cooled down to room temperature, the lamps are removed and a force of 15N is applied for 1min to each of the conductors connected. Following this, a force of 30N is applied for 1min to the two conductors together. The forces are applied at a distance of 3mm±0.8mm from the insertion points in the lampholder so as to try to move the contacts from the lampholders. During the test the lampholder shall not move more than 0.8mm.

3. Specification:

4. Drawings

5. COMPETITIVE ADVANTAGE
1). PEGO is professional on electrical lab testing equipment, our goal is to provide our customers with better price, better quality and better service.

2). Customized Service: We can help our customers to design and develop new equipment according to their requirement. We are flexible and capable Supplier.

3).Excellent Quality: 12 months warranty, 100% guarantee test before delivery. And all our products can pass the third-lab calibration which is authorized by ISO17025.
4). After Sales Service and Technical Assistance: 24 hours technical support by email. Our professional team is always here willing to be your technical consultant.

5). Quick Delivery: Our company provides just-in-time delivery, and our freight forwarder can provide transportation services at the most reasonable price to solve your worries.

6). Prompt Response to Customers: we promise to reply our customers within 24 hours