MachineU > China Products > Fabrication Services > Moulds
PLC Automatic Abrasion Resistance Tester Hardened Steel Radius 0.25mm Scratch Pin
PLC Automatic Abrasion Resistance Tester Hardened Steel Radius 0.25mm Scratch Pin
Specifications
Brand Name :
Pego Group
Model Number :
PG-9583
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Payment Terms :
T/T, Western Union, MoneyGram
Supply Ability :
50 sets/month
Delivery Time :
15 working days
Packaging Details :
carton
Standard Comliant :
IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2
Configuration :
hardened steel pin, test bench
Pin size :
40°Conical sharp+0.25mm radius
Control component :
PLC+touch screen
Warranty :
12 months
Working Power :
220V/50Hz
Description

Automatic Abrasion Resistance Tester with Radius 0.25mm Scratch Pin

1. Application

The abrasion resistance tester is applied for Scratch testing on solid insulating accessible parts or printed boards used in household appliances and similar products to ensure that the material has sufficient strength not to be pierced by sharp tools.

2. Introduction

Abrasion resistance tester is designed according to IEC60950 clause 2.10.8.4 and IEC60335-1 clause 21.2. It is applied to do scratch test for accessible parts of solid insulation of household appliance and printed circuit boards, to ensure the material has sufficient strength to prevent penetration by sharp implements.

The scratch resistance test uses a hardened steel pin for scratching. The end of the steel pin should be tapered with a apex angle of 40°. The tip should be rounded with radius of 0.25 mm ± 0.02 mm.

When performing the scratch test, the test pin is held at 80-85° to the horizontal, scratches were performed at a speed of 20 mm/s ± 5 mm/s in a plane perpendicular to the edge of the conductor. The steel pin should be properly loaded so that the hardened steel pin can apply a force of 10N ± 0.5N along its axial direction. The scratch interval should be at least 5mm and at least 5mm away from the edge of the sample.

This equipment adopts the control system of PLC+ touch screen, and the performance is stable. Rotating the work surface makes it easy to realize the scratch test in both directions.

3. Specification

Scratching speed 0~25mm/s (adjustable)
Test times 0~9999 times (adjustable)
Scratching spacing 0~50mm (adjustable)
Working table 3600 rotation
Scratch angle 80-850 (the pin is fixed by clamp)
Force applied 10N±0.5N (option: 30N±0.5N equip with 20N weights)
Scratching pin Rounded with a radius of 0.25 mm ± 0.02 mm
Pin Tip 40°Conical sharp
Material of the pin Hardened steel
Working power 220V/50Hz
Control system PLC+touch screen
Drive mode Stepping motor

Send your message to this supplier
Send Now

PLC Automatic Abrasion Resistance Tester Hardened Steel Radius 0.25mm Scratch Pin

Ask Latest Price
Product Detail
Brand Name :
Pego Group
Model Number :
PG-9583
Certification :
Third-Lab Calibration Certificate
Place of Origin :
China
MOQ :
1 set
Price :
Negotiation
Contact Supplier
PLC Automatic Abrasion Resistance Tester Hardened Steel Radius 0.25mm Scratch Pin

Pego Electronics (Yi Chun) Company Limited

Verified Supplier
7 Years
jiangxi, yichun
Since 2014
Business Type :
Manufacturer, Distributor/Wholesaler, Exporter, Trading Company
Main Products :
Electrical Safety Test Equipment, Environment Test Equipment, Impact Test Equipment
Certification Level :
Verified Supplier
Discover similar products
View More
Watch related videos

Find Similar Products By Category:

Supplier Homepage Products Electrical Safety Test Equipment
MachineU China Products Fabrication Services Moulds
Contact Supplier
Submit Requirement