80% RH Dielectric Voltage Withstand Test Equipment With 16X2 Dot Matrix Digital Display ​

The main parameters:

1, the input characteristics: single-phase 47 ~ 63HZ, 115 / 230V ± 15% (optional), 3A fuse

2, AC voltage test: Rated output: 5KV / 12mA

3, the output frequency: 60 / 50Hz Selectable)

4, the output waveform: sine wave distortion <2%, crest factor 1.3 ~ 1.5

5, the upper limit setting: Range: 0.10 ~ 12.00mA, resolution: 0.01mA, accuracy: ± (2% 2 words)

* 1

6, the lower limit setting: Range: 0 ~ 12.00mA, resolution: 0.01mA, Accuracy: ± (2% of the set

value +2 words) * 1

7, DC voltage test: rated Output: 6KV / 5mA

8, the output ripple: <5% (in 6KV / 5mA, linear load test)

9, the upper limit setting: Range: 0.02 ~ 5.00mA, resolution: 0.01mA Accuracy: % Setting value

+2 words) * 2

10, lower limit setting: Range: 0.00 ~ 5.00mA, resolution: 0.01mA Accuracy: ± (2% of the set

value +2 words) * 2

11, Voltage setting: Resolution: 10V, Accuracy: ± (2% set value + 5V) Voltage regulation: ± (1%

set value + 5V) No load to full load

13, Rise time: Range: 0,1 ~ 999.9s, resolution: 0.1s

14, the test time: Range: 0,0.2 ~ 999.9S, resolution 0.1S, (0 = continuous test)

15, the arc detection: can set the sensitivity: 0 ~ 9

16, voltmeter: Range: 0.00 ~ 6.00KV, resolution: 0.01KV Accuracy: ± (2% of reading +1 words)

17, ammeter: Range: AC 0.10 ~ 12.00mA, DC 0.02 ~ 5.00 (1%) Accuracy: ± (2% of the reading

+1 words) Resolution: 0.01mA

18, programmable logic remote control: Input: Test, Reset Output: Pass,

19, test results expression: buzzer, LCD display and reading, remote control status output

20, memory group: 5 groups of test conditions memory, each group has 4 kinds of test mode

(test-in-process)

21, keyboard security lock: keyboard security lock to prevent misuse of the operator or program

to modify

22 LCD display: 16X2 dot matrix, anti-white backlight

23, Temperature: 0 ~ 40 ℃, relative humidity <80% RH

25, size: 89mm high X280mm wide X370mm deep

26, the weight: 9kg.