YB Type Switchgear Cabinet Electric Enclosure Customized IP23D High-Voltage

Description:

YB series preinstalled substation, is the high-voltage electrical equipment, transformer, low-voltage electrical equipment and other groups into compact complete sets of distribution equipment, commonly known as European box change, for urban high-rise construction, urban and rural buildings, residential areas, High-tech development zone, small-and medium-sized factories, mine oil fields and temporary construction of electricity and other places for the distribution system for the acceptance and distribution of electricity.

YB series prefabricated substations have the characteristics of strong complete set, small size, compact structure, safe and reliable operation, convenient maintenance and removable, compared with conventional civil substations. The same capacity boxtype substation occupies only 1 / 10 / 1 / 5 of the conventional substation, which greatly reduces the design workload and construction amount, and reduces the construction cost. In the distribution system, it can be used in the distribution system of ring network, or in the distribution system of dual power or radiation terminal. It is a new complete set of equipment for the construction and transformation of urban and rural substations at present.

YB series pre-installed substation conforms to the standard of SD320-1992 box substation technical condition and GB/T17467- 1998 high voltage / low voltage preinstalled substation. Shell material can be selected according to the needs of the user non-metallic, composite or steel plate.

Normal Use Environment Condition:

Altitude: ≤ 1000m;

Wind speed: ≤ 34m/s (≤ 700pa);

Environmental temperature: maximum temperature + 40 ℃, minimum temperature -35 ℃;

Relative humidity: the daily average is not greater than 95% and the monthly average is not greater than 95%.

Shockproof: water leveling speed is not greater than 0.4 / S2, the vertical speed is not greater than 0.15 m2;

Inclination of installation site: not more than 3 °;

Installation environment: installed in places free of fire, explosion hazards, severe contamination, chemical corrosion

and severe vibration.

Note: if you exceed the above conditions, you can negotiate with us.

Design Feature:

This product is connected by high voltage distribution equipment, transformer and low voltage distribution device, and is divided into three functional compartments, namely, high voltage room, transformer room and low voltage room. The primary power supply system on the high voltage side can be arranged into a variety of power supply modes such as ring network power supply terminal power supply double power supply and so on. High voltage metering elements can also be installed to meet the needs of high voltage metering. The transformer room can select S7S9 and other low-loss oil-immersed transformers and dry-type transformers.

The transformer room is equipped with self-starting forced air-cooling system and lighting system. According to the user's request, the low-voltage room can adopt the panel or cabinet structure to form the power supply scheme needed by the user. There are power distribution, lighting and distribution, reactive power compensation, Many kinds of power energy, such as electric energy measurement and electric quantity measurement, meet the different requirements of users, and facilitate the management of power supply and improve the quality of power supply.

The structure of the high-pressure chamber is compact and reasonable, and it has the function of anti-misoperation interlocking. The transformer can be equipped with track to enter and exit from both sides of the transformer room when required by the user. All the rooms are equipped with autodynamic lighting devices, in addition, all the components selected in the high and low pressure rooms are reliable in performance, convenient in operation, safe in operation and convenient in operation and maintenance.

Adopt natural general purpose and forced ventilation to make ventilation cool well. Both the transformer room and the low voltage room have ventilation channels, and the exhaust fan has a temperature control device, which can start and close automatically according to the setting temperature to ensure the transformer running at full load.

The box structure is a full assembly structure. Special steel plate or aluminum alloy plate made by electrostatic spraying, with long-term outdoor use conditions, to ensure anticorrosion, waterproof, dustproof performance, long service life, at the same time beautiful appearance.

Main Technical Parameters:

FAQ:

Q:What's your MOQ?

A:Our MOQ is 1 pc.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

Q:Whether you could make our brand on your products?

A:Yes. We can print your Logo on both the products and the packages if you can meet our MOQ.

Q: What is the shipping method?

A: It could be shipped by sea,by air or by express(EMS,UPS,DHL,TNT,FEDEX and ect).Please confirm with us before placing orders.

Q:What is your terms of packing?

A:Generally, we pack our goods in neutral boxes and brown cartons. we can also pack the goods in your branded boxes after getting your authorization letters.