Meat Grinder Electric 0.5HP 400W Industrial Heavy Duty Professional Commercial
Description:
Specifications:
Item number | MG-204191 | MG-204185 | 52021250 |
Rate Power | 400W | 500W | 500W |
Master Pack | 4pcs/ctn | 4pcs/ctn | 1pc/ctn |
Measure |
19''x17''x17'' 485x435x435mm |
20''x18''x16'' 500x445x410mm |
16''x13''x14'' 410x335x345mm |
Touble-shooting Guide:
Problems | Solutions |
Grinder runs slowly and erratically | Possible cold gear grease problem. Move grinder to warmer area. If this does not work contact customer service. |
Meat is backing up at the grinder | Auger is not able to handle large portions of meat. Cut meat into smaller pieces so auger can work properly. |
Meat is only turning around the auger and compressing against the head | Meat is too warm. Cool meat to a temperature around 40℃. |
Meat does not flow through grinder | Make sure grinder head is properly assembled. Check sharpness of knife blade. |
Meat is backing up at head and will not flow | Meat may be snagging on the auger or other parts. Lubricate internal parts with food-grade silicone spray. |