3 Phase Induction Motor
MS series motor is of wound rotor three-phase asynchronous motor, which complies with JB/T10314.2-2002.The protection degree of the motor is IP44/IP54, and the cooling method is IC611.
The motor has high efficiency, energy saving, low noise, low vibration, lightweight and reliable performance. In addition, they are easy for installation and maintenance.
This motor can generate more enormous starting torque at a relatively lower starting current state. Therefore, it is used where the capacity of the feeder line is insufficient to form a squirrel cage motor where a longer starting time and frequent starting are needed, or where speed adjustment is required within a limited range such as windlass, press, drawing machines.
The structure and the mounting type are IMB3 with continuous duty (S1). The related frequency is 50HZ, and the rated voltage is 6kv. Other voltage requirements or special requirements should be negotiated with the manufacturer before the order is placed.
1.100% copper wire, cold-rolled silicon steel sheet, and complimentary accessories
2. Advanced three-phase brushless motor
3. C.E. certificate
High-quality Capacitor
Adopt suitable capacitor made by advanced production line, heat resistant to 85℃; the working lift is motor than 10000 hours.
Cold-rolled Stator
A high-speed punching machine makes good quality cold-rolled silicon from the wu gang brand with high concentricity and stability.
Coil with 100% Copper wire
100% copper wire, with thermal protector, make the pump stop working automatically at the condition of jam or overload
No leakage Of winding
100% coil testing to make sure each coil is energized, and no leakage at high voltage condition
The revised standard includes the following line-motors | |
Model | MS562-4 |
Power range | 0.09KW |
Level | IE1-Standard Efficiency IE2-High Efficiency IE3-Premium Efficiency |
Voltage | 230/400V/60Hz |
Degree of protection | all |
Operating mode | S1(permanent operation with constant load); motors that are designed for different operating modes but can still be operated permanently with rated output. |
Degree of temperature | -20. C- + 60.C |
Altitude | Up to 4000m above sea level |
Number of Poles | 4 |
Validity | Standard IEC |
IE3 Premium Efficiency
Model | Power | (V) | (A) | Spee d r/min | Eff. (%) | P.F. | Tstart/Tn | Ist/In | |||
Kw | HP | 50% | 75% | 100% | |||||||
IE3 MS801-2 | 0.75 | 1 | 230/400 | 2.82/1.63 | 2820 | 79.7 | 81.0 | 80.7 | 0.831 | 2.3 | 6.0 |
IE3 MS802-2 | 1.1 | 1.5 | 4.0/2.3 | 2820 | 81.5 | 82.9 | 82.7 | 0.836 | 2.3 | 7.5 | |
IE3 MS90S-2 | 1.5 | 2 | 5.23/3.02 | 2840 | 84.0 | 85.0 | 84.2 | 0.857 | 2.4 | 7.5 | |
IE3 MS90L-2 | 2.2 | 3 | 7.44/4.3 | 2840 | 86.0 | 86.5 | 85.9 | 0.865 | 2.4 | 7.5 | |
IE3 MS100L-2 | 3 | 4 | 9.9/5.72 | 2850 | 88.2 | 87.3 | 87.1 | 0.873 | 2.4 | 8.0 | |
IE3 MS112M-2 | 4 | 5.5 | 400/690 | 7.48/4.32 | 2870 | 88.0 | 88.4 | 88.1 | 0.880 | 2.4 | 8.5 |
IE3 MS132S1-2 | 5.5 | 7.5 | 10/5.8 | 2900 | 89.1 | 89.6 | 89.2 | 0.890 | 2.2 | 7.5 | |
IE3 MS132S2-2 | 7.5 | 10 | 13.5/7.8 | 2900 | 90.0 | 90.5 | 90.1 | 0.892 | 2.2 | 7.5 | |
IE3 MS160M1-2 | 11 | 15 | 19.5/11.3 | 2920 | 89.8 | 91.3 | 91.2 | 0.896 | 2.2 | 8.5 | |
IE3 MS160M2-2 | 15 | 20 | 26.2/15.1 | 2920 | 91.6 | 92.0 | 91.9 | 0.805 | 2.2 | 8.5 | |
IE3 MS160L-2 | 18.5 | 25 | 31.9/18.4 | 2920 | 92.1 | 92.5 | 92.4 | 0.910 | 2.2 | 8.5 | |
IE3 MS802-4 | 0.75 | 1 | 230/400 | 2.97/1.72 | 1400 | 81.0 | 82.7 | 82.5 | 0.770 | 2.4 | 7.0 |
IE3 MS90S-4 | 1.1 | 1.5 | 4.25/2.45 | 1420 | 82.6 | 84.3 | 84.1 | 0.775 | 2.4 | 7.5 | |
IE3 MS90L-4 | 1.5 | 2 | 5.68/3.28 | 1420 | 83.8 | 85.4 | 85.3 | 0.778 | 2.4 | 8.0 | |
IE3 MS100L1-4 | 2.2 | 3 | 8.0/4.62 | 1440 | 84.3 | 86.7 | 86.7 | 0.798 | 2.4 | 8.0 | |
IE3 MS100L2-4 | 3 | 4 | 10.8/6.2 | 1440 | 86.0 | 87.6 | 87.7 | 0.801 | 2.4 | 8.0 | |
IE3 MS112M-4 | 4 | 5.5 | 400/690 | 7.97/4.6 | 1450 | 88.3 | 88.8 | 88.6 | 0.821 | 2.4 | 7.5 |
IE3 MS132S-4 | 5.5 | 7.5 | 10.8/6.2 | 1450 | 89.0 | 89.7 | 89.6 | 0.825 | 2.3 | 7.5 | |
IE3 MS132M-4 | 7.5 | 10 | 14.4/8.32 | 1450 | 90.1 | 90.6 | 90.4 | 0.834 | 2.3 | 7.5 | |
IE3 MS160M-4 | 11 | 15 | 20.8/12.0 | 1460 | 90.5 | 91.5 | 91.4 | 0.838 | 2.2 | 7.0 | |
IE3 MS160L-4 | 15 | 20 | 27.9/16.1 | 1460 | 91.5 | 92.5 | 92.1 | 0.847 | 2.2 | 7.0 | |
IE3 MS90S-6 | 0.75 | 1 | 230/400 | 3.42/1.97 | 910 | 77.5 | 94.4 | 78.9 | 0.700 | 2 | 4.0 |
IE3 MS90L-6 | 1.1 | 1.5 | 4.8/2.78 | 910 | 80.2 | 81.3 | 81.0 | 0.710 | 2 | 4.0 | |
IE3 MS100L1-6 | 1.5 | 2 | 6.35/3.66 | 930 | 81.3 | 82.6 | 82.5 | 0.720 | 2 | 5.0 | |
IE3 MS112M-6 | 2.2 | 3 | 8.98/5.2 | 940 | 83.2 | 85.0 | 84.3 | 0.730 | 2 | 5.0 | |
IE3 MS132S-6 | 3 | 4 | 11.9/6.87 | 960 | 84.5 | 85.8 | 85.6 | 0.740 | 2.2 | 6.5 | |
IE3 MS132M1-6 | 4 | 5.5 | 400/690 | 9.0/5.2 | 960 | 85.3 | 86.9 | 86.8 | 0.745 | 2.2 | 7.0 |
IE3 MS132M2-6 | 5.5 | 7.5 | 12.1/7.0 | 960 | 86.9 | 88.2 | 88.0 | 0.750 | 2.2 | 7.0 | |
IE3 MS160M-6 | 7.5 | 10 | 16.1/9.3 | 970 | 87.5 | 89.0 | 89.1 | 0.760 | 2.2 | 7.0 | |
IE3 MS160L-6 | 11 | 15 | 22.9/13.2 | 970 | 89.0 | 90.2 | 90.3 | 0.770 | 2.2 | 7.0 |
IE2 High Efficiency
Model | Power | (V) | (A) | (r/min) | Eff. (%) | P.F. | Ist/In | Tmax/Tn | |||
Kw | HP | 50% | 75% | 100% | |||||||
IE2 MS801-2 | 0.75 | 1 | 230/400 | 3.0/1.73 | 2800 | 76.5 | 77.3 | 77.4 | 0.813 | 2.2 | 2.3 |
IE2 MS802-2 | 1.1 | 1.5 | 4.2/2.43 | 2800 | 79.0 | 80.0 | 79.6 | 0.825 | 2.2 | 2.3 | |
IE2 MS90S-2 | 1.5 | 2 | 5.53/3.19 | 2820 | 80.2 | 81.5 | 81.3 | 0.837 | 2.2 | 2.3 | |
IE2 MS90L-2 | 2.2 | 3 | 7.93/4.58 | 2820 | 82.2 | 83.5 | 83.2 | 0.837 | 2.2 | 2.3 | |
IE2 MS100L-2 | 3 | 4 | 10.5/6.06 | 2830 | 84.0 | 85.1 | 84.6 | 0.848 | 2.2 | 2.3 | |
IE2 MS112M-2 | 4 | 5.5 | 400/690 | 7.97/4.6 | 2850 | 85.4 | 86.8 | 85.8 | 0.848 | 2.2 | 2.3 |
IE2 MS132S1-2 | 5.5 | 7.5 | 10.65/6.15 | 2870 | 86.7 | 87.3 | 87.0 | 0.860 | 2 | 2.3 | |
IE2 MS132S2-2 | 7.5 | 10 | 14.35/8.28 | 2870 | 87.6 | 88.3 | 88.1 | 0.860 | 2 | 2.3 | |
IE2 MS160M1-2 | 11 | 15 | 20.74/11.97 | 2900 | 89.0 | 89.8 | 89.4 | 0.860 | 2 | 2.3 | |
IE2 MS160M2-2 | 15 | 20 | 27.99/16.16 | 2900 | 90.0 | 90.5 | 90.3 | 0.860 | 2 | 2.3 | |
IE2 MS160L-2 | 18.5 | 25 | 33.83/19.53 | 2900 | 90.3 | 91.0 | 90.9 | 0.872 | 2 | 2.2 | |
IE2 MS802-4 | 0.75 | 1 | 230/400 | 3.28/1.9 | 1380 | 77.3 | 79.8 | 79.6 | 0.720 | 2.3 | 2.3 |
IE2 MS90S-4 | 1.1 | 1.5 | 4.57/2.64 | 1400 | 79.9 | 81.7 | 81.4 | 0.743 | 2.3 | 2.3 | |
IE2 MS90L-4 | 1.5 | 2 | 6.02/3.48 | 1400 | 82.1 | 83.5 | 82.8 | 0.755 | 2.3 | 2.3 | |
IE2 MS100L1-4 | 2.2 | 3 | 8.42/4.86 | 1420 | 82.6 | 84.5 | 84.3 | 0.778 | 2.2 | 2.3 | |
IE2 MS100L2-4 | 3 | 4 | 11.32/6.54 | 1420 | 84.2 | 85.7 | 85.5 | 0.778 | 2.2 | 2.3 | |
IE2 MS112M-4 | 4 | 5.5 | 400/690 | 8.47/4.89 | 1430 | 85.8 | 87.0 | 86.6 | 0.790 | 2.2 | 2.3 |
IE2 MS132S-4 | 5.5 | 7.5 | 11.18/6.45 | 1450 | 87.4 | 88.3 | 87.7 | 0.813 | 2.2 | 2.3 | |
IE2 MS132M-4 | 7.5 | 10 | 14.85/8.58 | 1450 | 88.2 | 89.0 | 88.7 | 0.825 | 2.2 | 2.3 | |
IE2 MS160M-4 | 11 | 15 | 21.84/12.61 | 1460 | 89.1 | 90.0 | 89.8 | 0.813 | 2.2 | 2.3 | |
IE2 MS160L-4 | 15 | 20 | 29.08/16.79 | 1460 | 90.2 | 91.1 | 90.6 | 0.825 | 2.2 | 2.3 | |
IE2 MS90S-6 | 0.75 | 1 | 230/400 | 3.82/2.2 | 910 | 73.4 | 76.3 | 75.9 | 0.650 | 2 | 2.2 |
IE2 MS90L-6 | 1.1 | 1.5 | 5.25/3.03 | 910 | 77.0 | 78.8 | 78.1 | 0.673 | 2 | 2.2 | |
IE2 MS100L-6 | 1.5 | 2 | 6.77/3.91 | 940 | 79.6 | 80.8 | 79.8 | 0.697 | 2 | 2.2 | |
IE2 MS112M-6 | 2.2 | 3 | 9.69/5.59 | 940 | 80.4 | 81.6 | 81.8 | 0.697 | 2 | 2.2 | |
IE2 MS132S-6 | 3 | 4 | 12.56/7.25 | 960 | 81.0 | 83.4 | 83.3 | 0.720 | 2 | 2.2 | |
IE2 MS132M1-6 | 4 | 5.5 | 400/690 | 9.36/5.4 | 960 | 82.7 | 84.5 | 84.6 | 0.732 | 2 | 2.2 |
IE2 MS132M2-6 | 5.5 | 7.5 | 12.47/7.2 | 960 | 84.8 | 86.2 | 86.0 | 0.743 | 2 | 2.2 | |
IE2 MS160M-6 | 7.5 | 10 | 16.78/9.69 | 970 | 86.4 | 87.5 | 87.2 | 0.743 | 2 | 2 | |
IE2 MS160L-6 | 11 | 15 | 24.19/13.97 | 970 | 88.2 | 89.2 | 88.7 | 0.743 | 2 | 2 |
IE1 Standard Efficiency
Model | Power | (V) | (A) | P.F. | Eff.(%) | Speed (r/min) | Tstart/Tn | Tmax/Tn | Ist/In(A) | |
kW | HP | |||||||||
MS561-2 | 0.09 | 0.12 | 220/380 | 0.57/0.33 | 0.68 | 62 | 2800 | 2.3 | 2.4 | 6 |
MS562-2 | 0.12 | 0.16 | 220/380 | 0.67/0.38 | 0.71 | 67 | 2800 | 2.3 | 2.4 | 6 |
MS631-2 | 0.18 | 0.24 | 220/380 | 0.91/0.53 | 0.75 | 69 | 2800 | 2.2 | 2.4 | 6 |
MS632-2 | 0.25 | 0.33 | 220/380 | 1.17/0.68 | 0.78 | 72 | 2800 | 2.2 | 2.4 | 6 |
MS711-2 | 0.37 | 0.5 | 220/380 | 1.65/0.95 | 0.80 | 73.5 | 2800 | 2.2 | 2.4 | 6 |
MS712-2 | 0.55 | 0.75 | 220/380 | 2.33/1.35 | 0.82 | 75.5 | 2800 | 2.2 | 2.4 | 6 |
MS801-2 | 0.75 | 1 | 220/380 | 3.03/1.75 | 0.85 | 76.5 | 2800 | 2.2 | 2.4 | 6 |
MS802-2 | 1.1 | 1.5 | 220/380 | 4.42/2.55 | 0.85 | 77 | 2800 | 2.2 | 2.4 | 6 |
MS90S-2 | 1.5 | 2 | 220/380 | 6.01/3.84 | 0.85 | 77 | 2800 | 2.2 | 2.4 | 6 |
MS90L-2 | 2.2 | 3 | 220/380 | 8.61/4.98 | 0.86 | 78 | 2800 | 2.2 | 2.4 | 6 |
MS100L-2 | 3 | 4 | 220/380 | 11.1/6.4 | 0.87 | 82 | 2870 | 2.2 | 2.3 | 7 |
MS112M-2 | 4 | 5.5 | 380/660 | 8.2/4.7 | 0.87 | 85.5 | 2890 | 2.2 | 2.3 | 7 |
MS132S1-2 | 5.5 | 7.5 | 380/660 | 11/6.4 | 0.88 | 85.5 | 2900 | 2.0 | 2.2 | 7 |
MS132S2-2 | 7.5 | 10 | 380/660 | 15/8.6 | 0.88 | 86.2 | 2900 | 2.0 | 2.2 | 7 |
MS160M1-2 | 11 | 15 | 380/660 | 21.3/12.2 | 0.88 | 88 | 2930 | 2.0 | 2.2 | 7 |
MS160M2-2 | 15 | 20 | 380/660 | 28.7/16.4 | 0.89 | 89 | 2930 | 2.0 | 2.2 | 7 |
MS160L-2 | 18.5 | 25 | 380/660 | 34.6/19.8 | 0.90 | 90 | 2930 | 2.0 | 2.2 | 7 |
MS180M-2 | 22 | 30 | 380/660 | 40.9/23.4 | 0.90 | 90.5 | 2930 | 2.0 | 2.2 | 7 |
MS561-4 | 0.06 | 0.08 | 220/380 | 0.49/0.28 | 0.58 | 56 | 1400 | 2.3 | 2.4 | 6 |
MS562-4 | 0.09 | 0.12 | 220/380 | 0.67/0.39 | 0.61 | 58 | 1400 | 2.3 | 2.4 | 6 |
MS631-4 | 0.12 | 0.16 | 220/380 | 0.84/0.48 | 0.63 | 60 | 1400 | 2.2 | 2.4 | 6 |
MS632-4 | 0.18 | 0.24 | 220/380 | 1.12/0.65 | 0.66 | 64 | 1400 | 2.2 | 2.4 | 6 |
MS711-4 | 0.25 | 0.33 | 220/380 | 1.44/0.83 | 0.68 | 67 | 1400 | 2.2 | 2.4 | 6 |
MS712-4 | 0.37 | 0.5 | 220/380 | 0.94/1.12 | 0.72 | 69.5 | 1400 | 2.2 | 2.4 | 6 |
MS801-4 | 0.55 | 0.75 | 220/380 | 2.69/1.56 | 0.73 | 73.5 | 1400 | 2.2 | 2.4 | 6 |
MS802-4 | 0.75 | 1 | 220/380 | 3.48/2.01 | 0.75 | 75.5 | 1400 | 2.2 | 2.4 | 6 |
MS90S-4 | 1.1 | 1.5 | 220/380 | 4.74/2.75 | 0.78 | 78 | 1400 | 2.2 | 2.4 | 6 |
MS90L-4 | 1.5 | 2 | 220/380 | 6.31/3.65 | 0.79 | 79 | 1400 | 2.2 | 2.3 | 7 |
MS100L1-4 | 2.2 | 3 | 220/380 | 8.6/5.0 | 0.82 | 81 | 1430 | 2.2 | 2.3 | 7 |
MS100L2-4 | 3 | 4 | 220/380 | 11.7/6.8 | 0.81 | 82.5 | 1430 | 2.2 | 2.3 | 7 |
MS112M-4 | 4 | 5.5 | 380/660 | 8.8/5.1 | 0.82 | 84.5 | 1440 | 2.2 | 2.2 | 7 |
MS132S-4 | 5.5 | 7.5 | 380/660 | 12/6.9 | 0.84 | 85.5 | 1440 | 2.2 | 2.2 | 7 |
MS132M-4 | 7.5 | 10 | 380/660 | 15/8.6 | 0.85 | 87 | 1440 | 2.2 | 2.2 | 7 |
MS160M-4 | 11 | 15 | 380/660 | 22.3/12.7 | 0.85 | 88 | 1460 | 2.2 | 2.2 | 7 |
MS160L-4 | 15 | 20 | 380/660 | 30/17.1 | 0.85 | 89 | 1460 | 2.0 | 2.2 | 7 |
MS180M-4 | 18.5 | 25 | 380/660 | 36.4/20.8 | 0.85 | 90.5 | 1470 | 2.2 | 2.2 | 7.5 |
MS180L-4 | 22 | 30 | 380/660 | 43.1/24.6 | 0.85 | 91 | 1470 | 2.2 | 2.2 | 7.5 |
MS90S-6 | 0.75 | 1 | 220/380 | 4.0/2.3 | 0.70 | 72.5 | 910 | 2.2 | 2.2 | 5.5 |
MS90L-6 | 1.1 | 1.5 | 220/380 | 5.5/3.2 | 0.72 | 73.5 | 910 | 2.2 | 2.2 | 5.5 |
MS100L-6 | 1.5 | 2 | 220/380 | 6.9/4.0 | 0.74 | 77.5 | 940 | 2.2 | 2.2 | 6 |
MS112M-6 | 2.2 | 3 | 220/380 | 9.7/5.6 | 0.74 | 80.5 | 940 | 2.2 | 2.2 | 6 |
MS132S-6 | 3 | 4 | 220/380 | 12.4/7.2 | 0.76 | 83 | 960 | 2.2 | 2.0 | 6.5 |
MS132M1-6 | 4 | 5.5 | 380/660 | 9.4/5.4 | 0.77 | 84 | 960 | 2.0 | 2.0 | 6.5 |
MS132M2-6 | 5.5 | 7.5 | 380/660 | 13/7.5 | 0.78 | 85.3 | 960 | 2.0 | 2.0 | 6.5 |
MS160M-6 | 7.5 | 10 | 380/660 | 16.5/9.43 | 0.80 | 87.5 | 970 | 2.0 | 2.0 | 6.5 |
MS160L-6 | 11 | 15 | 380/660 | 24.1/13.8 | 0.79 | 89 | 970 | 2.0 | 2.0 | 6.5 |
MS180L-6 | 15 | 20 | 380/660 | 31.5/18 | 0.81 | 86 | 970 | 2.0 | 2.0 | 7.0 |
MS132S-8 | 2.2 | 3 | 220/380 | 10/5.8 | 0.71 | 85.5 | 710 | 2.0 | 2.0 | 5.5 |
MS132M-8 | 3 | 4 | 220/380 | 13.3/7.7 | 0.72 | 82 | 710 | 2.0 | 2.0 | 5.5 |
MS160M1-8 | 4 | 5.5 | 380/660 | 10.2/5.8 | 0.73 | 81 | 720 | 2.0 | 2.0 | 6.0 |
MS180M2-8 | 5.5 | 7.5 | 380/660 | 13.6/7.8 | 0.74 | 83 | 720 | 2.0 | 2.0 | 6.0 |
MS160L-8 | 7.5 | 10 | 380/660 | 17.7/10.1 | 0.75 | 85.5 | 720 | 2.0 | 2.0 | 6.0 |
MS180L-8 | 11 | 15 | 380/660 | 25.1/14.3 | 0.76 | 87.5 | 730 | 2.0 | 2.0 | 6.5 |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
![]() | ![]() | ![]() |
Guarantee
Guarantee for one year from shipped on board date. During the guarantee period, our company will provide free easy-damaged spare parts for problems caused by our quality of production or raw material, except the damageable spare parts caused by customer's incorrect artificial operation. In addition, after expiration, our company provides cost spare parts for maintenance.
1. Directly factory sale
2. Quick response to 2-8hours, response rates over 92%
3. 24 hours phone call is available. Feel free to contact us.
4. We provide one-stop services for all goods produced by ourselves, from designing printing to processing. Customers can provide the design according to your request and sample making. Also, we can advise how to make the products according to customers' target prices.