Hydraulic Portable Cutting Fork Lifting Platform Electric Mobile Lifting Platform

Advantages:

• No need for a pit or ramps.

• load capacity from 600KG to 1500KG.(U shape)

• Min.height is 85/105mm,while max.height is 860/870mm.

• Usually used with pallet,which can be replaced on the table by using standard pallet truck.

• Equipped with safe device(aluminum safety bar) to prevent descent on contact with obstructions

• External power pack with pedestal and controls.

• With hose burst safety valve to stop the lift table lowering in case of hose breakage.

• With compensated flow valve to control machine lowering speed

• With overload protection device(relief valve) to prevent overload damage

• With safety wedge to facilitate maintenance.

• With self lubricating bushings on pivot points to extend fork arms' life.

• Removable lifting eyebolts can help the operation and installation of the lift table.

1. The lifting platform has been inspected and debugged at the factory before delivery. All the technical indexes have reached the design requirements. When using, the lifting platform only needs to be connected with the power supply, and the hydraulic system and electrical system need not to be adjusted.

2. The platform should be carefully checked before use of hydraulic, electrical systems, no leakage or naked leakage before use.

3. Lifting platform in use, the four legs should be firmly supported on a solid ground (with the wheel to leave the ground shall prevail) if necessary, the use of sleepers.

4. Lifting platform empty run 1-3 times before loading operation.

5 load center of gravity should be as far as possible in the center of the table.

6.Guard railings at both ends of the movable door should be locked after the lock operation.