KFZ-I Power Transformer Capacity, Load and No Load Loss Tester

Introduction:

• Power transformers an important electrical equipment, and their safe and reliable operation is extremely important for power systems.
• After the impact of a short-circuit current, the transformer winding deformation test is very important.
• To short-circuit the low-voltage winding side of the transformer and apply a low voltage of the operating frequency (50Hz or 60Hz normally) to the high-voltage winding side of the transformer, the short-circuit impedance method measures the short-circuit impedance of the operating frequency.
• The test result is mainly leakage reactance component, determined by the geometry of the winding.
• The change of the transformer winding structure will cause changes in the transformer leakage reactance, resulting in transformer short circuit impedance numerical changes.
• KFZ Power Transformer Excitation Current, Capacity, Load Loss Tester follows the national power industry standards DLT 1093-2008, and can be used for IEC60076-5-2006.
• KFZ Power Transformer Excitation Current, Capacity, and Load Loss Tester can also be used for generator rotor AC impedance test, transformer load, and no load loss test.

Specifications:

• Using six channels of AD chip of 16 bits;

• With a 7-inch LCD touch screen which the brightness can be adjusted;

• With a thermal printer the print thick can be adjusted;

• It could store fifty groups of SCI data and thirty groups of GAI data, which could be read to the current screen or uploaded to the PC;

• With PC software using which we could upload data, test, analyze data, print data, or create Word document;

• Using USB2.0 to connect to the device;

• Tester dimension: 49*31*25cm;

• Weight: 8.0KG;

• Power: AC220V±10%, (50 or 60)HZ ;