Atomic Absorption Spectrophotometer AAS Analyzer
Features:
Specifications:
Working spectral range | 190-900nm |
Wavelength accuracy | ≤ ±0.5nm |
Wavelength repeatability | ≤ 0.3nm (single direction) |
Spectrum bandwidth | 0.2nm, 0.4nm, 0.7nm, 1.4nm, 2.4nm, 5.0nm |
Resolution | <40% |
Base line stability | ±0.004Abs/30min |
Characteristic concentration of copper | ≤ 0.04mg/ml/1% |
Detection limit of copper | ≤0.008mg/ml |
Background calibration ability | Greater than 30 times |
Standby Interface | RS 232 |
Instrument power supply | 220V, 3A, 50Hz |
Complete set of accessories:
Light-source system
Hollow cathode lamp power supply: with adjustable current Deuterium Lamp power supply: with fixed current
Optical system
Double beam total refection system, C-T type monochromator Flashing wavelength: 250nm
Flame atomization system
Inter-changeable titanium alloy burner of 10cm and 5cm slits. Gas path is equipped with pressure indication, high precision voltage stabilizing flow adjustment, fast conversion of air and nitrous oxide, gas supply cut off, power cut off, prevention of flashback and logic interlock protection devices.
Signal processing
Absorptance, concentration, emission and emission concentration; Standard curves: linear regression, curve fitting and multi-point standard calibration. Average value, standard deviation, relative standard deviation and correlation coefficient can be worked out. Standard curves, atomic absorption peak diagram, spectrum outline sketch, data as well as instrument parameters list and analytical reports can be displayed and printed out.